N.B. Each time you assemble a burner, check that all of its component parts fit together correctly. A badly positioned component may
Before connecting the hob to the powercausesupplythe hob glass to overheat.
check that the voltage and frequency are tho-
se indicated in the rating plate located on the Lighting of burners lower part of the hob.
For hobs models CGC 4G, CG.1 4G. and CG.1
3G. 1P. | (See drawing 22). |
Remove the protecting plastic affixed to the | • Check that the controls are in th |
hob, if any. | |
| position. |
Component Parts of Gas Burners
| • Open the mains connection gas t |
| gas bottle cock. |
| • Put a lit match, lighter or flame, |
A | to the burner if no automatic lig |
available. | |
B | While keeping the burner control pres |
it in | |
| until the maximum setting (large fla |
C | The burner operates at that mome |
power. Then, if desired, turn the cont | |
D | minimum position (small flame “D”). |
APan support supplement
BPan support
CBurner cover
DBurner head
EGas nozzle
F Nozzle unit
E | A | B |
F |
| |
| C | |
Drawing 21 | Drawing 22 | D |
|
A Burner indicator
B Setting indicator
C Off setting
D Minimun gas setting
E Maximun gas setting
E
24