Important
If Something Doesn’t Work
Before calling the Technical Service, make the following checks:
Fault | Possible Cause | Solution | |
Neither the hob nor the pilot light works. | The mains cable is not connected. | Connect the mains cabl | |
| |||
|
|
|
|
No spark appears | Power is not reaching the plug. | Check / |
|
when the automatic ignition |
| ||
switch is pressed. |
| ||
|
| ||
|
| repair the mains supply | |
A spark appears but | The sparking plug and | Clean the end of the spar | |
the burner does not ignite. | |||
| |||
| the corresponding burner zone | plug and the burner. | |
| is dirty or coated with grease. |
|
|
The burners do not ignite. |
|
|
|
|
|
|
|
Gas is not reaching the hob.
Check that the gas bottle re is correctly positioned
and open. Open the gas connectio
tap in the case of mains g
The burner ignites
but when the safety switch- is released it goes out.
There is no flame in the | The gas burners blacken the |
thermocouple zone. | Clean burner apertures |
Clean the burner apertures. | |
Burner apertures dirty. | |
Gas nozzle or diffuser dirty. | Clean gas nozzle or diffu |
| without using objects wh |
| could damage or alter |
| the diameter of the gas |
| outlet orifice. |