Maytag HRE21250PC, HRE21282PC manual Water Piping, Valve Pipe Insulation

Page 10

Instructions for Installation (cont’d)

Water Piping

* WARNING

HOTTER WATER CAN SCALD: Water heaters are intended to produce hot water. Water heated to a temperature which will satisfy clothes washing, dish washing, and other sanitizing needs can scald and permanently injure you upon contact. Some people are more likely to be permanently injured by hot water than others. These include the elderly, children, the infirm, or physically/mentally handicapped. If anyone using hot water in your home fits into one of these groups or if there is a local code or state law requiring a certain temperature water at the hot water tap, then you must take special precautions. In addition to using the lowest possible temperature setting that satisfies your hot water needs, a means such as a mixing valve, should be used at the hot water taps used by these people or at the water heater. Mixing valves are available at plumbing sup- ply or hardware stores. Follow manufacturers instruc- tions for installation of the valves. Before changing the factory setting on the thermostat, read the “Temperature Regulation” section in this manual.

*See illustration on page 8 for mixing valve usage.

The illustration shows the attachment of the water piping to the water heater. The water heater is equipped with 3⁄4 inch water connections.

If a water heater is installed in a closed water supply system; such as one having a back-flow preventer, check valve, water meter with a check valve, etc. in the cold water supply; means shall be provided to control thermal expansion. Contact the local utility or call Maytag Customer Service at 1-800-788-8899 for an authorized servicer on how to con- trol this situation.

NOTE: If using copper tubing, solder tubing to an adapter before attaching the adaptor to the cold water inlet connec- tion. Do not solder the cold water supply line directly to the cold water inlet. It will harm the dip tube and damage the tank.

1.Look at the top cover of the water heater. The water outlet is marked hot. Connect the hot water pipe to the hot water outlet of the water heater.

2.Look at the top cover of the water heater. The cold water inlet is marked cold. Connect the cold water pipe to the cold water inlet of the water heater.

NOTE: Your water heater is super insulated to minimize heat loss from the tank. Further reduction in heat loss can be accomplished by insulating the hot water lines from the water heater.

HOT OUTLET TO

SHUT-OFF

COLD INLET

 

HOUSE

VALVE

WATER LINE

 

 

 

 

 

 

 

THREADED TO

THREADED TO

SWEAT COUPLING

SWEAT COUPLING

3/4″ THREADED

 

 

 

 

3/4″ THREADED

 

 

 

 

NIPPLE

 

HOT

COLD

 

NIPPLE

 

 

 

 

TEMPERATURE-

PRESSURE RELIEF

VALVE

DISCHARGE PIPE (Do not cap or plug)

6″ AIR GAP

FLOOR DRAIN

T&P Valve and

Pipe Insulation

Remove insulation for T&P Valve and pipe connections from carton.

Fit pipe insulation over the

incoming cold water line and the hot water line. Make sure that the insulation is against the top cover of the heater.

Fit T&P Valve insulation over valve. Make sure that the insula- tion does not interfere with the lever of the T&P valve.

Secure all insulation using tape.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Water Heater USER’S Guide Safety Instructions DEATH, Serious Bodily INJURY, or Property DamageSafety Instructions cont’d Table of Contents Product Specifications Customer InformationAdditional Tools Needed When Sweat Soldering Accessories and Tools NeededAccessories ToolsInstallation Instructions Removing the Old Water HeaterLocating The New Water Heater Instructions for Installation cont’dTypical Installation Check ALL Connections for LeaksConvertible Lower Element OUS Bodily INJURY, or Property DamageWater Piping Valve Pipe InsulationTemperature-Pressure Relief Valve NippleFilling the Water Heater Converting the Lower ElementConverting the Lower Element cont’d Instructions for Installation cont’d Wiring Diagram Standard Wiring forWiring Selecting Thermostat Location Thermostat RemovalThermostat Removal cont’d Thermostat Wiring Loop Remote Thermostat Installation and Wiring Selecting Thermostat Location cont’dExact color sequence as shown Installation Checklist Model Rating PlateInstructions for Operation Temperature RegulationTemperature Conditions Programming the ThermostatInstructions for Operation cont’d Programming the Thermostat cont‘dOverride Display Will not kill the power to the heating elements Temperature-Pressure Relief Valve Operation Service and MaintenanceDraining Element Cleaning Replacement Service and Maintenance cont’dAnode Rod Inspection Service and Maintenance cont’d Element Cleaning Replacement cont’d Drain Valve Washer Replacement ServiceStart Up Conditions TroubleshootingOperational Conditions Troubleshooting cont’d Operational Conditions cont’dThermostat Diagnostics Leakage Checkpoints LY INJURY, or Property DamagePage Repair Parts List ETC5XRepair Parts List cont’d Maytag Electric Water Heaters Model NumbersKEY Part Description NumbersWarranty Full ONE Year Warranty

HRE21282PC, HRE21250PC specifications

The Maytag HRE21282PC and HRE21250PC are two standout models in the brand's renowned lineup of laundry appliances, designed to combine efficiency, durability, and performance for the modern household. Both models feature an elegant design with user-friendly interfaces, making them attractive and accessible for all users.

One of the main features of the HRE21282PC and HRE21250PC is their impressive capacity. Both models boast a generous drum size that allows for larger loads, meaning users can complete their laundry in fewer cycles. This is particularly beneficial for families or individuals with busy lifestyles who need to maximize efficiency.

In terms of technology, these machines are equipped with Maytag’s advanced PowerWash cycle, which is designed to tackle tough stains and heavily soiled fabrics. This cycle works by utilizing a combination of robust wash actions and a prolonged wash time, ensuring that users can trust their appliances to deliver exceptional cleaning results.

Another notable feature is the Optimal Dose dispenser, which automatically releases the right amount of detergent at the perfect time during the wash cycle. This technology not only ensures optimal cleaning performance but also saves on detergent usage, making it a more economical option in the long run.

The HRE21282PC and HRE21250PC also come with a variety of wash cycles and temperature settings, allowing users to customize their laundry experience according to the specific needs of their garments. Whether dealing with delicate fabrics or heavy-duty items, these models are versatile enough to handle any type of load.

Durability is a crucial characteristic of Maytag appliances, and the HRE21282PC and HRE21250PC are no exceptions. Built with quality materials, they feature a robust construction that can withstand the rigors of frequent use. This reliability is complemented by a strong motor power and a solid build that contributes to their longevity.

Additionally, both models offer energy-efficient operations, contributing to lower utility bills while being environmentally friendly. Users can feel confident knowing they are making a responsible choice when selecting these appliances.

In summary, the Maytag HRE21282PC and HRE21250PC excel in capacity, efficiency, and durability. With advanced technology such as the PowerWash cycle and Optimal Dose dispenser, combined with customizable options and energy efficiency, these models cater to the diverse needs of today's consumers, serving as reliable partners in tackling everyday laundry challenges.
Top Page Image Contents