Maytag HRE21282PC Service and Maintenance, Temperature-Pressure Relief Valve Operation, Draining

Page 27

Service and Maintenance

Temperature-Pressure Relief Valve Operation

The temperature-pressure relief valve must be manually oper- ated at least once a year.

TEMPERATURE-PRESSURE

RELIEF VALVE

DISCHARGE PIPE

Draining

The water heater should be drained if being shut down during freezing temperatures. Also periodic draining and cleaning of sediment from the tank may be necessary.

1.Before beginning turn “OFF” the electric power supply to the water heater.

WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. Failure to do this could result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

2. CLOSE the cold water inlet valve to the water heater.

WARNING

The temperature-pressure relief valve must be manually operated at least once a year. Caution should be taken to ensure that (1) no one is in front of or around the outlet of the temperature-pres- sure relief valve discharge line, and (2) the water manually discharged will not cause any property damage or bodily injury. The water may be extremely hot.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the cold water inlet to the water heater, follow the draining instructions, and replace the temperature-pressure relief valve with a new one.

Failure to install and maintain a new properly listed tempera- ture-pressure relief valve will release the manufacturer from any claim which might result from excessive temperature or pressure.

WARNING

If the temperature-pressure relief valve on the appliance weeps or discharges periodically, this may be due to thermal expansion. Your water heater may have a check valve installed in the water line or a water meter with a check valve. Call Maytag Customer Service at 1-800-788-8899 for an authorized servicer. Do not plug the temperature- pressure relief valve.

3.OPEN a nearby hot water faucet and leave open to allow for draining.

4.Connect a hose to the drain valve and terminate to an ade- quate drain or outdoors.

5.OPEN the water heater drain valve to allow for tank draining.

NOTE: If the water heater is going to be shut down and drained for an extended period, the drain valve should be left open with hose connected allowing water to termi- nate to an adequate drain.

6.Close the drain valve.

7.Follow “Filling the Water Heater” instructions in the “Instructions for Installation” section.

8.Turn “ON” power to the water heater.

CAUTION

Never use this water heater unless it is completely full water. To prevent damage to the tank and heat- ing element, the tank must be filled with water. Water must flow from the hot water faucet before turning “ON” power.

27

Image 27
Contents Water Heater USER’S Guide DEATH, Serious Bodily INJURY, or Property Damage Safety InstructionsSafety Instructions cont’d Table of Contents Customer Information Product SpecificationsTools Accessories and Tools NeededAccessories Additional Tools Needed When Sweat SolderingRemoving the Old Water Heater Installation InstructionsCheck ALL Connections for Leaks Instructions for Installation cont’dTypical Installation Locating The New Water HeaterOUS Bodily INJURY, or Property Damage Convertible Lower ElementValve Pipe Insulation Water PipingNipple Temperature-Pressure Relief ValveConverting the Lower Element Filling the Water HeaterConverting the Lower Element cont’d Instructions for Installation cont’d Standard Wiring for Wiring DiagramWiring Thermostat Removal Selecting Thermostat LocationThermostat Removal cont’d Thermostat Wiring Loop Selecting Thermostat Location cont’d Remote Thermostat Installation and WiringExact color sequence as shown Model Rating Plate Installation ChecklistProgramming the Thermostat Temperature RegulationTemperature Conditions Instructions for OperationProgramming the Thermostat cont‘d Instructions for Operation cont’dOverride Display Will not kill the power to the heating elements Service and Maintenance Temperature-Pressure Relief Valve OperationDraining Service and Maintenance cont’d Element Cleaning ReplacementAnode Rod Inspection Service and Maintenance cont’d Element Cleaning Replacement cont’d Service Drain Valve Washer ReplacementTroubleshooting Start Up ConditionsOperational Conditions Operational Conditions cont’d Troubleshooting cont’dThermostat Diagnostics LY INJURY, or Property Damage Leakage CheckpointsPage ETC5X Repair Parts ListMaytag Electric Water Heaters Model Numbers Repair Parts List cont’dDescription Numbers KEY PartFull ONE Year Warranty Warranty

HRE21282PC, HRE21250PC specifications

The Maytag HRE21282PC and HRE21250PC are two standout models in the brand's renowned lineup of laundry appliances, designed to combine efficiency, durability, and performance for the modern household. Both models feature an elegant design with user-friendly interfaces, making them attractive and accessible for all users.

One of the main features of the HRE21282PC and HRE21250PC is their impressive capacity. Both models boast a generous drum size that allows for larger loads, meaning users can complete their laundry in fewer cycles. This is particularly beneficial for families or individuals with busy lifestyles who need to maximize efficiency.

In terms of technology, these machines are equipped with Maytag’s advanced PowerWash cycle, which is designed to tackle tough stains and heavily soiled fabrics. This cycle works by utilizing a combination of robust wash actions and a prolonged wash time, ensuring that users can trust their appliances to deliver exceptional cleaning results.

Another notable feature is the Optimal Dose dispenser, which automatically releases the right amount of detergent at the perfect time during the wash cycle. This technology not only ensures optimal cleaning performance but also saves on detergent usage, making it a more economical option in the long run.

The HRE21282PC and HRE21250PC also come with a variety of wash cycles and temperature settings, allowing users to customize their laundry experience according to the specific needs of their garments. Whether dealing with delicate fabrics or heavy-duty items, these models are versatile enough to handle any type of load.

Durability is a crucial characteristic of Maytag appliances, and the HRE21282PC and HRE21250PC are no exceptions. Built with quality materials, they feature a robust construction that can withstand the rigors of frequent use. This reliability is complemented by a strong motor power and a solid build that contributes to their longevity.

Additionally, both models offer energy-efficient operations, contributing to lower utility bills while being environmentally friendly. Users can feel confident knowing they are making a responsible choice when selecting these appliances.

In summary, the Maytag HRE21282PC and HRE21250PC excel in capacity, efficiency, and durability. With advanced technology such as the PowerWash cycle and Optimal Dose dispenser, combined with customizable options and energy efficiency, these models cater to the diverse needs of today's consumers, serving as reliable partners in tackling everyday laundry challenges.