Maytag HRE21250PC, HRE21282PC manual Will not kill the power to the heating elements

Page 26

Instructions for Operation (cont’d)

Programming the Thermostat (cont‘d)

The third optional mode (3) setting involves the default tem- perature set point for the control. To be in this mode, depress the up ( ) arrow or the down ( ) arrow until a large number 3 appears in the lower right-hand corner. The default temperature from the factory is 120°F. This will appear in the upper-left hand corner as 0120. To change the default setting, depress either + or - of the “TIME” button until the desired default temperature is displayed in the upper left-hand corner. The range for set point temperature is 80°F to 160°F.

The fourth optional mode (4) setting involves the vacation tem- perature setting. This is factory set at 80°F or 0080 in the upper left-hand corner. To change the vacation default setting, make sure the optional mode is in the number (4) setting by depress- ing the up ( ) arrow or the down ( ) arrow button until a large number 4 is displayed in the lower right-hand corner. To change the vacation temperature default setting, depress either + or - of the “TIME” button until the desired vacation tempera- ture is achieved in the upper left-hand corner of the display. The range for vacation default setting is 60°F to 120°F.

The fifth optional mode (5) setting involves the maximum tem- perature set point. To be this mode, depress the up ( ) arrow or the down ( ) arrow while in optional setting sequence until a large number 5 is displayed in the lower right-hand corner. The default factory maximum set point is 160°F or 0160 in the upper left-hand corner. To change this setting depress either + or - of the “TIME” button until the desired maximum set point is achieved in the upper left-hand corner. The range for maxi- mum set point is 100°F to 160°F.

To return to regular operation of the program control, depress the “PROGRAM” and “MODE” buttons simultaneously again until the normal display appears. All the optional settings that were revised will remain until they are once again reset by using the above prescribed procedures.

SCALD WARNING is a flashing display warning any time the temperature is adjusted above 120°F. It represents an indus- try warning that water temperatures above 120°F represent a scald hazard when skin surface is exposed for a small amount of time. This is a warning and can not be removed from the screen display.

“PWR” (POWER) BUTTON is a button at the right-hand bottom of the panel which will activate or deactivate the display panel. It will not turn off the power to the water heater and

will not kill the power to the heating elements.

WARNING

HAZARD OF ELECTRICAL SHOCK! Before removing any access panels or servicing the water heater, make sure the electrical supply to the water heater is turned “OFF”. Failure to do this could result in

DEATH, SERIOUS BODILY INJURY, OR PROPERTY DAMAGE.

ELECTRICAL POWER OUTAGES will not effect the Intelligent programming or control settings. The unit has a bat- tery backup that maintains the programmed settings until the electrical power is restored. At the time power is restored the program will again display the settings and information that had been available before the loss of power.

DRY FIRE PREVENTION is a feature that has been pro- grammed into the Intelligent water heater. Should someone install or service the water heater and forget to fill the tank, the unit will sense a rapid heat cycle beyond normal expectations and disable the energy. A message will be displayed on the screen to add water, at which time the unit can be re-energized.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Water Heater USER’S Guide Safety Instructions DEATH, Serious Bodily INJURY, or Property DamageSafety Instructions cont’d Table of Contents Product Specifications Customer InformationAdditional Tools Needed When Sweat Soldering Accessories and Tools NeededAccessories ToolsInstallation Instructions Removing the Old Water HeaterLocating The New Water Heater Instructions for Installation cont’dTypical Installation Check ALL Connections for LeaksConvertible Lower Element OUS Bodily INJURY, or Property DamageWater Piping Valve Pipe InsulationTemperature-Pressure Relief Valve NippleFilling the Water Heater Converting the Lower ElementConverting the Lower Element cont’d Instructions for Installation cont’d Wiring Diagram Standard Wiring forWiring Selecting Thermostat Location Thermostat RemovalThermostat Removal cont’d Thermostat Wiring Loop Remote Thermostat Installation and Wiring Selecting Thermostat Location cont’dExact color sequence as shown Installation Checklist Model Rating PlateInstructions for Operation Temperature RegulationTemperature Conditions Programming the ThermostatInstructions for Operation cont’d Programming the Thermostat cont‘dOverride Display Will not kill the power to the heating elements Draining Service and MaintenanceTemperature-Pressure Relief Valve Operation Anode Rod Inspection Service and Maintenance cont’dElement Cleaning Replacement Service and Maintenance cont’d Element Cleaning Replacement cont’d Drain Valve Washer Replacement ServiceOperational Conditions TroubleshootingStart Up Conditions Troubleshooting cont’d Operational Conditions cont’dThermostat Diagnostics Leakage Checkpoints LY INJURY, or Property DamagePage Repair Parts List ETC5XRepair Parts List cont’d Maytag Electric Water Heaters Model NumbersKEY Part Description NumbersWarranty Full ONE Year Warranty

HRE21282PC, HRE21250PC specifications

The Maytag HRE21282PC and HRE21250PC are two standout models in the brand's renowned lineup of laundry appliances, designed to combine efficiency, durability, and performance for the modern household. Both models feature an elegant design with user-friendly interfaces, making them attractive and accessible for all users.

One of the main features of the HRE21282PC and HRE21250PC is their impressive capacity. Both models boast a generous drum size that allows for larger loads, meaning users can complete their laundry in fewer cycles. This is particularly beneficial for families or individuals with busy lifestyles who need to maximize efficiency.

In terms of technology, these machines are equipped with Maytag’s advanced PowerWash cycle, which is designed to tackle tough stains and heavily soiled fabrics. This cycle works by utilizing a combination of robust wash actions and a prolonged wash time, ensuring that users can trust their appliances to deliver exceptional cleaning results.

Another notable feature is the Optimal Dose dispenser, which automatically releases the right amount of detergent at the perfect time during the wash cycle. This technology not only ensures optimal cleaning performance but also saves on detergent usage, making it a more economical option in the long run.

The HRE21282PC and HRE21250PC also come with a variety of wash cycles and temperature settings, allowing users to customize their laundry experience according to the specific needs of their garments. Whether dealing with delicate fabrics or heavy-duty items, these models are versatile enough to handle any type of load.

Durability is a crucial characteristic of Maytag appliances, and the HRE21282PC and HRE21250PC are no exceptions. Built with quality materials, they feature a robust construction that can withstand the rigors of frequent use. This reliability is complemented by a strong motor power and a solid build that contributes to their longevity.

Additionally, both models offer energy-efficient operations, contributing to lower utility bills while being environmentally friendly. Users can feel confident knowing they are making a responsible choice when selecting these appliances.

In summary, the Maytag HRE21282PC and HRE21250PC excel in capacity, efficiency, and durability. With advanced technology such as the PowerWash cycle and Optimal Dose dispenser, combined with customizable options and energy efficiency, these models cater to the diverse needs of today's consumers, serving as reliable partners in tackling everyday laundry challenges.
Top Page Image Contents