Multiquip Qp-2TE manual QP- 2TE General Information, Application

Page 14

QP- 2TE — GENERAL INFORMATION

APPLICATION

The QP-2TE Trash Pump is designed to be used for dewatering applications. Both the suction and discharge ports on the QP- 2TE trash pump use a 2-inch diameter opening, which allows the pump to pump at a rate of approximately 211 gallons/minute (gpm) or 800 liters/minute (lpm).

Trash or self-priming pumps are designed to purge air from the suction line and create a partial vacuum in the pump body.The reduced atmospheric pressure inside the pump allows water to flow through the suction line and into the pump body. The centrifugal force created by the rotating impeller pressurizes the water and expels it from the pump.

Power Plant

This trash pump is powered by an 5.7 horsepower air cooled 4- stroke, single cylinder ROBIN EX-170gasoline engine that incorporates a low "Oil Alert Feature"

Oil Alert Feature

In the event of low oil or no oil, the ROBIN EX-170 engine has a built-in oil alarm engine shutdown feature. In the event the oil level is low the engine will automatically shut down.

Trash Pump

Trash pumps derive their name from their ability to handle a greater amount of debris and solids than standard centrifugal pumps.This pump generally handle solids up to 1/2 the size of the discharge opening making them less likely to clog. Also trash pumps are capable of handling water with 25% solids by weight.

The advantage of using a trash pump is that it can be quickly and easily disassembled in the field "without tools" and easily cleaned when clogged.

Suction Lift

This pump is intended to be used for dewatering applications and is capable of suction lifts up to 25 feet at sea level. For optimal suction lift performance, keep the suction hose or line as short as possible. In general, always place the pump as close to the water as possible.

Pump Support

The pump should always be placed on solid stationary ground in a level position.

NEVER place the pump on soft soil. The suction hose or pipe connection should always be checked for tightness and leaks. A small suction leak in the hose or fittings could prevent the pump from priming.

Elevation

Higher elevations will effect the performance of the pump. Due to less atmospheric pressure at higher altitudes, pumps DO NOT have the priming ability that they have at sea level. This is due to the “thinner air” or lack of oxygen at higher altitudes.

A general rule of thumb is that for every 1,000 feet of elevation above sea level a pump will lose one foot of priming ability.

For example, in Flagstaff, Arizona where the elevation is approximately 7,000 feet, the pump would have a suction lift of 25 feet rather than the 18 feet at sea level.Table 3 shows suction lift at various elevations.

Table 3. Suction Lift at Various Elevations

Altitude

 

 

Suction Lift in Feet (Meters)

 

 

Feet (Meters)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sea Level

10.0 (3.048)

15.0

(4.572)

20.0 (6.096)

25.0 (7.620)

 

 

 

 

 

 

 

 

2,000 (610)

8.80

(2.680)

13.2

(4.023)

17.6

(5.364)

22.0 (6.705)

 

 

 

 

 

 

 

 

 

4,000 (1,219)

7.80

(2.377)

11.7

(3.566)

15.6

(4.754)

19.5

(5.943)

 

 

 

 

 

 

 

 

 

6,000 (1,829)

6.90

(2.103)

10.4

(3.169)

13.8

(4.206)

17.3

(5.273)

 

 

 

 

 

 

 

 

8,000 (2,438)

6.20

(1.889)

9.30 (2.834)

12.4

(3.779)

15.5

(4.724)

 

 

 

 

 

 

 

 

10,000 (3,048)

5.70

(1.737)

8.60 (2.621)

11.4

(3.474)

14.3

(4.358)

 

 

 

 

 

 

 

 

 

Table 4 shows percentage drops in performance as elevation increases.

Table 4. Performance Loss at Various

Elevations

Altitude

Discharge Flow

Discharge Head

Feet (Meters

 

 

 

 

 

Sea Level

100%

100%

 

 

 

2,000 (610)

97%

95%

 

 

 

4,000 (1,219)

95%

91%

 

 

 

6,000 (1,829)

93%

87%

 

 

 

8,000 (2,438)

91%

83%

 

 

 

10,000 (3,048)

88%

78%

 

 

 

PAGE 14 — QP- 2TE TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #1 (08/10/10)

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model QP-2TE Proposition 65WARNING Page QP- 2TE Table of Contents Parts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Engine Safety Fuel Safety Transporting Safety Page QP- 2TE SPECIFICATIONS/DIMENSIONS Pump Specifications PumpSpecifications Engine QP- 2TE General Information ApplicationQP- 2TE Pump Components WaterQP- 2TE Refueling Plastic TRUCK-BED LinerQP- 2TE Basic Engine Initial ServicingQP- 2TE PRE-INSPECTION Engine Before StartingQP- 2TE PRE-SETUP Pump Read safety instructions at the beginning of manualQP- 2TE Initial START-UP Engine Starting the Engine Robin engineQP- 2TE Initial START-UP Engine QP- 2TE Maintenance Pump Pump Vacuum TestQP- 2TE Maintenance Pump QP- 2TE Maintenance Engine Engine Maintenance ScheduleQP- 2TE Maintenance Engine QP- 2TE Preparation for Long -TERM Storage Pump StoragePage QP- 2TE Troubleshooting Engine Engine TroubleshootingQP- 2TE Troubleshooting ENGINE/PUMP QP- 2TE Explanation of Code in Remarks Column QP- 2TE Suggested Spare Parts QP- 2TETRASH Pump 1TO 3 Units Robin EX170D50021 EngineQP- 2TE Pump Assy Part Name QTY Remarks QP- 2TE Pump Assy QP 2TE Pump Assy Bolt SET with Spring Washer Suction COVERM8 XRobin EX170D50021 ENGINE- Crankcase Assy Part Name QTY Remarks Robin EX170D50021 ENGINE- Crankshaft and Piston Assy Robin EX170D50021 ENGINE- Crankshaft and Piston Assy Robin EX170D50021 ENGINE- Governor Assy Part Name QTY. Remarks Robin EX170D50021 ENGINE- Intake Exhaust Assy PIN, CAM Shaft Robin EX170D50021 Engine AIR Cleaner Assy Base CP Robin EX170D50021 Engine Cooling and Starting Assy Robin EX170D50021 ENGINE- Cooling and Starting Assy Robin EX170D50021 Engine Carburetor Assy Throttle Valve Robin EX170D50021 Engine Flywheel Assy Part Name QTY Robin EX170D50021 ENGINE- Electric Device Assy OIL Sensor CP Robin EX170D50021 ENGINE- Fueltank Assy Fuel Tank CP Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

Qp-2TE specifications

The Multiquip QP-2TE is a highly regarded option in the realm of portable generators, designed to meet the demands of both commercial and residential applications. Renowned for its reliability and performance, the QP-2TE delivers exceptional power in a compact and user-friendly package.

At the heart of the Multiquip QP-2TE is a durable, high-performance engine that provides 2,000 watts of surge power and 1,600 watts of continuous power. This robust power output is more than sufficient for running essential equipment such as power tools, lighting, and even small appliances. The generator comes equipped with an easy-to-read fuel gauge, allowing users to monitor fuel levels at a glance, ensuring they can operate without interruptions.

The QP-2TE features a versatile power panel with multiple outlets. It includes both 120V and 12V DC outlets, enabling users to connect various devices simultaneously. The inclusion of a 120V, 20A duplex outlet adds to the generator's versatility, allowing it to power multiple tools at once or provide temporary power to an entire campsite. The generator's lightweight construction, weighing only around 45 pounds, ensures portability, making it suitable for outdoor events, job sites, or emergency backup power.

Technologically speaking, the QP-2TE integrates advanced features such as low oil shutdown and circuit protection. These safety mechanisms are crucial as they prevent damage to the engine and connected devices during operation, ensuring longevity and reliability. Its efficient cooling system also aids in preventing overheating, allowing the generator to function optimally for extended periods.

Another standout characteristic of the Multiquip QP-2TE is its whisper-quiet operation. Designed with noise reduction features, it operates at a remarkably low decibel level, making it ideal for use in residential neighborhoods or campgrounds where noise restrictions might be in place. Its fuel-efficient operation enhances its appeal, allowing users to maximize run time on a single tank of gas.

In summary, the Multiquip QP-2TE is a powerful, portable generator that combines rugged durability with advanced safety features and quiet operation. Its versatility, lightweight design, and efficient power output make it an excellent choice for those seeking reliable energy solutions in various settings. Whether for emergency power, outdoor activities, or job site operations, the QP-2TE stands out as a premium option in the portable generator market.
Top Page Image Contents