QP- 2TE Pump Components, Water | Multiquip Qp-2TE manual

QP- 2TE — PUMP COMPONENTS

Figure 2 shows a typical application using the QP- 2TE Trash pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1.0 inch (25 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris.

Figure 2. QP- 2TE Pump Application

1.	Pump – The model QP- 2TE is a 2-inch trash pump used
	in general dewatering applications. Typical dewatering
	applications consist of manholes, septic tanks, fast and
	slow seepage ditch water, silt water, mud water and muck
	water.
2.	Fill Cap – Prior to operation, the pump casing should be
	filled with water.Remove this cap to add water to the pump.
	After the initial prime, a sufficient amount of water will be
	retained in the casing so that the operator will not need to
	re-prime later.
	If the casing is dry or has insufficient water, the pump will
	have difficulty in priming which could lead to premature
	mechanical seal wear thus causing damage to the pump.
3.	Discharge Port – Connect a 2-inch discharge hose to this
	port.
4.	Worm Clamp – Used to secure the hose to the inlet and
	outlet ports on the pump. Use two clamps to secure the
	hose on the inlet side of the pump.
5.	Discharge Hose – Connect this flexible rubber hose to
	the discharge port on the pump. Make sure that the hose

lays flat and is not kinked. Use only recommended type discharge hose. Contact Multiquip Parts Department for ordering information.

6. Suction Port – Connect a 2-inch inlet hose to this port. Use two worm clamps to secure the hose.

7. Suction Hose – Connect this flexible rubber hose to the suction portion the pump. Make sure that the hose lays flat and is not kinked. Use only recommended type suction hose. Contact Multiquip Parts Department for ordering information.

8. Clean-out Cover Handles –To gain access to the pump's clean-out area, grip both handles, then pull to remove cover. Make sure both locking knobs have been released before attempting to remove clean-out cover.

9. Drain Plug – Remove this plug to drain water from the pump.

10. Clean-out Cover – Remove cover to gain access to the clean-out area.

11. Locking Knobs – Turn both knobs clockwise to secure clean-out cover, turn counterclockwise to release cover.

12. Strainer – Always attach a strainer to the bottom side of the suction hose to prevent large objects and debris from entering the pump. Strainer should be positioned so that it will remain completely under water.Running the pump with the strainer above water for long periods can damage pump.

QP- 2TE TRASH PUMP — OPERATION AND PARTS MANUAL — REV. #1 (08/10/10) — PAGE 15

Qp-2TE specifications

The Multiquip QP-2TE is a highly regarded option in the realm of portable generators, designed to meet the demands of both commercial and residential applications. Renowned for its reliability and performance, the QP-2TE delivers exceptional power in a compact and user-friendly package.

At the heart of the Multiquip QP-2TE is a durable, high-performance engine that provides 2,000 watts of surge power and 1,600 watts of continuous power. This robust power output is more than sufficient for running essential equipment such as power tools, lighting, and even small appliances. The generator comes equipped with an easy-to-read fuel gauge, allowing users to monitor fuel levels at a glance, ensuring they can operate without interruptions.

The QP-2TE features a versatile power panel with multiple outlets. It includes both 120V and 12V DC outlets, enabling users to connect various devices simultaneously. The inclusion of a 120V, 20A duplex outlet adds to the generator's versatility, allowing it to power multiple tools at once or provide temporary power to an entire campsite. The generator's lightweight construction, weighing only around 45 pounds, ensures portability, making it suitable for outdoor events, job sites, or emergency backup power.

Technologically speaking, the QP-2TE integrates advanced features such as low oil shutdown and circuit protection. These safety mechanisms are crucial as they prevent damage to the engine and connected devices during operation, ensuring longevity and reliability. Its efficient cooling system also aids in preventing overheating, allowing the generator to function optimally for extended periods.

Another standout characteristic of the Multiquip QP-2TE is its whisper-quiet operation. Designed with noise reduction features, it operates at a remarkably low decibel level, making it ideal for use in residential neighborhoods or campgrounds where noise restrictions might be in place. Its fuel-efficient operation enhances its appeal, allowing users to maximize run time on a single tank of gas.

In summary, the Multiquip QP-2TE is a powerful, portable generator that combines rugged durability with advanced safety features and quiet operation. Its versatility, lightweight design, and efficient power output make it an excellent choice for those seeking reliable energy solutions in various settings. Whether for emergency power, outdoor activities, or job site operations, the QP-2TE stands out as a premium option in the portable generator market.