Panasonic WJ-ND400 manual System Requirements for a PC, Trademarks and Registered Trademarks

Page 6

System Requirements for a PC

It is recommended to operate this unit using a PC that meets the following system requirements.

•

OS

: Microsoft® Windows Vista® Business (32-bit)

 

 

: Microsoft® Windows ® XP Professional SP2*

 

 

: Microsoft® Windows ® XP Home Edition SP2*

•

OS Language

: English, French, Spanish, German, Italian, Russian, Chinese

•

CPU

: Pentium® 4 3.0 GHz or faster

•

Memory

: 1 GB or more (512 MB or more is required when using Microsoft® Windows® XP.)

•

Monitor

: Resolution: 1 024 x 768 pixels or more

 

 

Color: 24-bit True color or better

•

Network interface

: 10/100/1 000 Mbps Ethernet port x1

•

Web Browser

: Windows® Internet Explorer® 7.0

 

 

: Microsoft® Internet Explorer® 6.0 SP2*

•

Audio interface

: Sound card (when using the audio function)

•

Other

: CD-ROM drive: It is necessary to refer to the operating instructions and use the software on the provided

 

 

CD-ROM.

:DirectX® 9.0c or later

:Adobe® Reader®: It is necessary to refer to the operating instructions on the provided CD-ROM.

*Microsoft® Internet Explorer® 6.0 SP2 is required when using Microsoft® Windows® XP Professional SP2 or Microsoft® Windows® XP Home Edition SP2.

Important:

•When using a PC that does not meet the above requirements, displaying of images may become slow or the web browser may become inoperable.

•Audio may not be heard if a sound card is not installed on a PC. Audio may be interrupted depending on the network environment.

•Refer to "Notes on Vista®" (PDF) for further information about system requirements for a PC and precautions when using Microsoft® Windows Vista®.

Trademarks and Registered Trademarks

•Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

•Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, DirectX are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

•Intel and Pentium are trademarks or registered trademarks of Intel Corporation and its subsidiaries in the USA and other countries.

•RSA is a registered trademark of RSA Security Inc. BSAFE is a registered trademark of RSA Security in the USA and other countries.

•Other names of companies and products contained in these operating instructions may be trademarks or registered trademarks of their respective owners.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Network Disk Recorder Operating Instructions Model No. WJ-ND400Contents Contents AttachmentsGlossary ContentsTroubleshooting IndexPreface About these Operating InstructionsSystem Requirements for a PC Trademarks and Registered TrademarksRestrictions when operating MPEG-4 images About operating windows Display and close the operating windowStart the PC Launch the web browser Click the buttons and tabs to set up operations About operating windowsNames and functions of components TopControl button Cam. select button Multiscreen select box Sequence box El-zoom boxCam. select box Setup button Status display area Playback point operation area HDD tabCamera at the time of recording CAM tab Recording images and audio Recording mode and priorityPriority Recording mode Manual recording of images and audioClick the HDD tab Click the Play button PlaybackPlayback recorded images On the HDD tab, click the Stop buttonPlayback Operations during playbackFunction Button Operation Playback Playback from a designated time and date Search for and playback imagesClick the Cam. select button Filter conditions Rec event list displayFilter Search Conditions Click the Rec event search button Search for and playback recorded eventsClick the OK button Conditions for filteringClick the VMD search button Click the Stop buttonSelect an area to play back Select the check box for the area to be played backLive images Screen displayLive images Useful functions while images are displayedFunction Name Button Operation Camera control Pan & tilt operationsClick the CAM tab Registration of a camera direction on the preset position Move a camera to the preset positionAuto mode function Auto pan etc Display switching Sequence Screen MultiscreenClick the Cam. select button Click the Sequence button Live images About Events EventEvent functions About event actionDisplay the operation window Click the Alarm Suspend button Canceling alarm actionSuspend alarm action Operations during an eventCancel the Error Status Cancel Preventing illegal operationsLock Checking logs Error logAccess log Click the List buttonEvent log Network logChecking logs Copying recorded images CopyingClick the Control button Click the Copy button Select the Copy area check box Click the OK button Playing back copied imagesCopying recorded images Click the HDD tab Click the log to playbackDeleting images Manual deletionClick the Delete button Click the Download button Downloading imagesDownloading images for playback Click the Save buttonDownloading images Installing the viewer softwareDownloaded image operations Downloading the viewer softwareWindows XP Uninstalling the viewer softwarePlaying back images Windows VistaSaving images Select the downloaded image data file name.n3rClick the Open button Printing images Alteration detectionTransmitting to the FTP server Transmit camera images when an event occursTransmitting data Send mailDisk information Checking system/disk informationSystem information Click the Display button on the Disk information windowAlarm mail notification About mail notificationDescription About mail notification RAID6 3 DownAltered **CH Description of error Error log Network log Error logAbout the error log ConnectorError log Output from ConnectorSkip COPY-HDD Full Area ERR COPY-HDD Full Ftploginfault Httpothererr Error log display Error operationsAbout the error operations Description of error RemedyError operations Parameter in the logs aboveParameter Description Detail Troubleshooting ProblemsProblem Check item/remedy Troubleshooting Audio is not be played correctly Troubleshooting Problem Remedy Message displayGlossary Words used in the manualGlossary System Administrator ResolutionSmtp authentication RouterIndex DNSPanasonic Canada Inc For European and other fields Panasonic Sales CompanyNetwork Disk Recorder Installation Guide For Your Safety Please Read the Following Text CARE- Fully This Class a digital apparatus complies with Canadian Ices Page Installation and Setup Description of FunctionsUsing the Front Panel for Operations About ConnectorsPower Supply SpecificationsPreface Network Security Precautions Place the unit horizontally on a level surface Indication labelHandle the unit with care MPEG-4 Visual patent portfolio license GPL/LGPLMajor Operating Controls and Their Functions Front ViewMajor Operating Controls and Their Functions Inside the Front Cover HDD access indicator A/FHDD status indicator STS USE button USERAID mode switch RAID HDD bay slotsRemoval knob Using the Brace Rear ViewHDD Space Management Outline of FunctionsMega Pixel Camera Compatibility and Capacity Replace HDDsHDD Fault Tolerance System Outline of FunctionsEncrypting Data Recorded on the HDDs Stable recording and playback of images Setting SchedulesRecording and Playing Images Event FunctionsEvent operations include the following Setup Menu ListList of Functions Live MonitoringNetwork Remote OperationNetwork Security Function SD Memory Recording Maintenance Version UpgradeRecording Rate Setting Acquiring images stored on the SD memory cardSetup Procedure Getting StartedRack Mounting Setting up the RackInstall the recorder in the rack Remove the 5 rubber feet from the underside of the recorderSetting up the Rack Rack mounting positionsConnections Connecting the PC and the CameraUsing a HUB for Direct Connection Port OperationConnections Connecting to a PC over Adsl Example of Connectivity with 1 Port OperationConnecting multiple units to the recorder HubhubExample of Connectivity with 2 Port Operation Connections Connecting the Extension Unit Secure connection cablePin Assignments About ConnectorsUsing the Alarm/Control connector Pin Name Description of Operation Remarks NumberAuto Adjustment Time Function Connection About ConnectorsConnectivity for Switching to External Recording Connectivity for Emergency RecordingSignal ground Time adjustment input Connectivity for Control OutputUninterruptible Power Supply UPS Connectivity UPSUsing the Alarm Connector AlarmAlarm Connectivity Connectors Active Time Remarks Turning Off the Power Power SupplyTurning On the Power During RecordingUsing the Front Panel for Operations Basic OperationsUsing the Front Panel for Operations Checking System InformationCamera port Client PC port Maintenance port Checking the IP AddressConfiguring the Settings for Each Item Setting the IP AddressSetting and Canceling Key Lock Click the SET button when the cursor isHDD Unit Use the two screws to fasten the bottom of the HDDHandling the HDD ReferenceInstalling HDDs HDD is automatically recognizedPress the USE button for over 2 seconds Installing HDDs by unit Install the HDD units in the extension unitCheck the available disk space Removing HDDs Remove the HDD unit Check the disk informationRemoving HDDs by unit Setting the HDDs Operation Mode Hold down the USE button and turn on the power to boot upTurn off the recorder HDD Error Recovery During RAID Operation Data source During HDD error malfunction During recoveryReplacing Faulty HDD during RAID Operation Rebooting Troubleshooting Power cord gets warm or hot if bent WJ-ND400 SpecificationsGeneral Specifications Input/outputAccessories Standard Accessories100BASE-TX 10BASE-T For business users in the European Union Network Disk Recorder Setup Instructions Initial configurations Disk management Data encryption Encryption settingsAlarm mail notification Formatting disksPreface System Requirements for a PC Restrictions when operating MPEG-4 images Settings Recorder NetworkSetup menu list Setting item DescriptionGetting started HDD Network settings Recorder network settingsSetting item Camera port Client PC port Maintenance port Network settings Use the arrow buttons to change the settingAfter confirming that the cursor is , press the SET button Click Properties PC network settingsDouble click Local Area Connection Click Network ConnectionsClick Internet Protocol TCP/IP and then click Properties Click the OK button to close the windowAbout operating windows About operating windows Names and functions of components Search box Search button Area select button Copy box Next page buttonCam. select button Displays a menu for setting the server Alarm ALM button Error ERR button Pause button Next Image button Playback may start a few seconds CAM tab Click the setup menu button to configure Click the sub menu tab to configureLanguage, and time & date settings Quick settingsSettings Quick settingsQuick settings Network setupUnder the Network setup item, click the Set button Camera registration Click the Registration buttonPort setup Camera port / Client PC port Program settings Basic setup BasicsBasics Time & date BasicsTime display format Basics Emergency recording Emergency recording settingsClick the Emergency rec. button on the setup menu Emergency recordingEmergency recording About the Measurement button About SD memory recordingAcquiring images saved on the SD memory card Event Basic event settings Terminal alarm Terminal alarm settingsSite alarm Site alarm settingsCommand alarm Command alarm settingsSchedules ProgramProgram settings Schedules3ips 5ips10ips About the Measurement button Time table setup Type of setting you want to configureTime table About externally controlled recording Automatically detecting and registering cameras CameraNW camera PortNW camera settings CameraSwitch cameras 4-screen display setting Checking and changing a camera Manually settingClick the Execute button Check or change the items you want Group settings GroupInput a group title Sequence Sequence display type settings Screen live sequenceNTP settings ServerFTP settings ServerServer Mail Mail settings SmtpProxy settings ProxyNetwork Network settings NetworkPort forwarding Ddns settings DdnsSnmp settings SnmpPanasonic alarm protocol Panasonic alarm protocol settingsBasic user management settings User managementAdministrator Administrator settingsUser management User setups UsersClick the Edit button Click the User mng. button on the setup menuEditing user information Deleting user information Click the Registration button Click the Set buttonHost settings HostsEditing host information Deleting host informationUser level User level settings Recorder information MaintenanceRecorder information Check the items you wantMaintenance Click the recording information Display buttonDisk information Recording informationNetwork information Network informationDisk settings DiskDeleting image data from a disk Data deleteSettings management Settings managementConfiguring disks HDD space managementConfiguring disks Click the Config. button on the setup menuDisk partition information Disk information Data encryption Encryption settingsEncryption settings Information window, click EncryptionInformation window, click Format Formatting disksFormat Click the Format buttonFormatting disks Click the Main buttonOn the disk config top window, click Format Pre-event recording area formattingClick the Format button About mail notification Network Link Error RAID5 1 Down Altered **CH Troubleshooting Troubleshooting Troubleshooting Message display Glossary Glossary Smtp 100 101 Index3TR005560BAB A0408-1078 Solution ALL
Related manuals
Manual 60 pages 6.87 Kb

WJ-ND400 specifications

The Panasonic WJ-ND400 is a robust network video recorder (NVR) designed for reliable and scalable surveillance solutions. It serves as a central component in a modern security system, enabling the management and storage of video data from IP cameras. This device is particularly well-suited for a variety of applications, ranging from small retail setups to large enterprise installations.

One of the key features of the WJ-ND400 is its impressive storage capacity, supporting up to 16 terabytes of internal storage. This allows for extended recording times and the ability to retain high-resolution video footage without sacrificing quality. It supports various video compression formats, such as H.264 and H.265, which optimize file sizes and bandwidth use while maintaining clarity.

The WJ-ND400 boasts an intuitive user interface that facilitates seamless configuration and management of the recording settings. Users can access the device through a web browser, providing a convenient way to monitor live feeds, playback recorded footage, and manage camera settings from anywhere with an internet connection. This remote access feature is critical for businesses that require flexible surveillance management.

In terms of connectivity, the NVR supports Power over Ethernet (PoE), allowing for simplified installations by reducing the need for additional power supplies for IP cameras. The WJ-ND400 also utilizes a 10/100/1000 BASE-T Ethernet interface that ensures high-speed data transfer, optimizing the performance of connected devices.

Moreover, the WJ-ND400 is compatible with a wide range of Panasonic IP cameras, enhancing its versatility within a surveillance setup. It supports up to 64 channels of video input, enabling integration of multiple cameras for comprehensive coverage of surveillance areas.

Advanced features include motion detection and scheduled recording, allowing users to customize recording parameters based on specific needs. The NVR can also provide event alerts and notifications, enhancing its capability to respond to security incidents in real time.

In conclusion, the Panasonic WJ-ND400 stands out for its powerful storage capabilities, user-friendly interface, and extensive compatibility with various cameras. Its efficient use of high-quality video compression, combined with robust networking features, makes it an optimal choice for organizations looking to enhance their security infrastructure.
Top Page Image Contents