Multiquip QP2H manual Setup

Page 17

SETUP

1.Place pump as near to water as possible, on a firm flat, level surface.

2.To prime pump, remove fill cap (See Figure 3) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping.

3.Attach suction and discharge hoses to the pump. Check that all hoses are securely attached to the pump. Make certain suction hose (See Figure 3) does not have any air leakage. Tighten hose clamps and couplings as required.

4.It is recommended that 2 clamps be used when securing the suction hose to the inlet side (suction) of the pump.

5.Remember suction hoses must be rigid enough not to collapse when the pump is in operation.

6.Check that the discharge hose (See Figure 3) is not restricted. Place hose so that it lays as straight as it is possible on the ground. Remove any twists or sharp bends from hose which may block the flow of water.

NOTICE

Suction and discharge hoses are available from Multiquip. Contact your nearest dealer for more information.

7.The discharge hose is usually a collapsible (thin-walled) hose, however if a thin-walled discharge hose is not available, a rigid suction hose can be substituted in its place.

8.Make sure the suction strainer (See Figure 3) is clean and securely attached to the water end of the suction hose. The strainer is designed to protect the pump by preventing large objects from being pulled in to the pump.

CAUTION

The strainer should be positioned so it will remain completely under water. Running the pump with the strainer above water for long periods can damage the pump.

QP2H CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #1 (01/29/14) — PAGE 17

Image 17
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP2HProposition 65 Warning Page QP2H Centrifugal Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationPump Safety General Safety„ Never open the priming plug when pump Serious damage to the equipment or engineBefore servicing equipment Engine SafetyFuel Safety „ Use well-insulated gloves when picking up the battery Battery Safety Electric Start onlyTransporting Safety Label must remain with the engine for its entire life Emissions InformationSpecifications Pump Specifications PumpDry Net Weight ModelSpecifications Engines Specifications EngineDimension EngineGeneral Information Drain Plug Remove this plug to drain water from the pump Pump ComponentsMuffler Used to reduce noise and emissions Basic EngineInitial Servicing Before Starting Inspection EngineOil Type SeasonSetup Operation Place the engine ON/OFF switch See in the on positionStarting the Engine Place the engine fuel valve lever See to the on positionPlace the fuel shut-off lever See in the OFF position Stopping the EngineAlways run engine at full speed while pumping Pump Vacuum Test Maintenance PumpPump Vacuum Tester Do not run pump without waterEngine Maintenance Maintenance EngineEngine Maintenance Schedule First EveryDaily Engine AIR CleanerWeekly Engine OILSpark Arrester Removal Spark Arrester CleaningPump Storage StorageEngine Troubleshooting Troubleshooting EngineSymptom Possible Problem Solution Difficult to start Operation not satisfactorySymptom Possible Problem Solution Troubleshooting ENGINE/PUMPPump Troubleshooting Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 1889350351 72041000100181050820 0191150520Engine Service Parts 28462ZH8003 17620Z4H02017210ZE0822 17218ZE0505Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help
Related manuals
Manual 68 pages 41.17 Kb

QP2H specifications

The Multiquip QP2H is a high-performance portable generator designed to meet the power needs of both professionals and recreational users. Known for its reliability and robust design, this generator incorporates advanced technologies that ensure efficient operation, durability, and ease of use.

At the heart of the QP2H is its powerful Honda GX160 engine, which provides a maximum output of 2,000 watts. This engine is renowned for its fuel efficiency and low emissions, making it an environmentally friendly choice for users. The generator is equipped with a recoil start system that allows for easy ignition, even in challenging situations. Its lightweight and compact design make it highly portable, allowing users to transport it effortlessly to job sites, campsites, or outdoor events.

One of the standout features of the QP2H is its dual voltage capability. Users can switch between 120V and 240V output with a simple adjustment, making it versatile enough to power a variety of devices. This is particularly useful for contractors who need to run both standard tools and higher-voltage equipment. The generator also includes multiple AC outlets, providing flexibility for connecting multiple devices simultaneously.

Durability is a core characteristic of the QP2H. The generator's frame is built from strong steel, ensuring it can withstand the rigors of daily use in tough environments. It also features a protective roll cage that guards against impacts and enhances stability on uneven surfaces. The generator's design incorporates noise-reducing technology, which minimizes operational sound, making it more suitable for residential areas or noise-sensitive locations.

Another noteworthy aspect of the QP2H is its fuel tank capacity, which allows for extended run times. Users can expect up to 7 hours of continuous operation on a single tank, depending on the load. This efficiency is critical for users who need a reliable power source without the frequent interruptions of refueling.

In conclusion, the Multiquip QP2H stands out in the portable generator market due to its powerful engine, dual voltage capability, robust construction, and user-friendly design. Whether for construction sites, outdoor adventures, or emergency power backup, this generator provides the reliability and versatility needed to meet diverse power requirements. With the QP2H, users can rest assured knowing they have a dependable source of electricity wherever they go.