Multiquip QP2H manual Battery Safety Electric Start only, Transporting Safety

Page 9

SAFETY INFORMATION

„Store fuel in appropriate containers, in well-ventilated areas and away from sparks and fl ames.

„NEVER use fuel as a cleaning agent.

„DO NOT smoke around or near the equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

„DO NOT drop the battery. There is a possibility that the battery will explode.

„DO NOT expose the battery to open fl ames, sparks, cigarettes, etc.The battery contains combustible gases and liquids. If these

gases and liquids come into contact with a fl ame or spark, an explosion could occur.

WARNING

„ALWAYS wear safety glasses when handling the battery to avoid eye irritation. The battery contains acids that can cause injury to the eyes and skin.

„Use well-insulated gloves when picking up the battery.

„ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

„DO NOT charge battery if frozen. Battery can explode. When frozen, warm the battery to at least 61°F (16°C).

„ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

„ If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

„If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to seek medical attention.

CAUTION

„ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

„ALWAYS keep battery cables in good working condition. Repair or replace all worn cables.

TRANSPORTING SAFETY

CAUTION

„NEVER allow any person or animal to stand underneath the equipment while lifting.

NOTICE

„Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

„Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment.

„ALWAYS shutdown engine before transporting.

„NEVER lift the equipment while the engine is running.

„Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„Use adequate lifting cable (wire or rope) of suffi cient strength.

„Use one point suspension hook and lift straight upwards.

„DO NOT lift machine to unnecessary heights.

„ALWAYS tie down equipment during transport by securing the equipment with rope.

QP2H CENTRIFUGAL PUMP • OPERATION AND PARTS MANUAL — REV. #1 (01/29/14) — PAGE 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents This Manual Must Accompany the Equipment AT ALL Times Model QP2HProposition 65 Warning Page QP2H Centrifugal Pump Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationPump Safety General Safety„ Never open the priming plug when pump Serious damage to the equipment or engineEngine Safety Fuel SafetyBefore servicing equipment Battery Safety Electric Start only Transporting Safety„ Use well-insulated gloves when picking up the battery Label must remain with the engine for its entire life Emissions InformationSpecifications Pump Specifications PumpDry Net Weight ModelSpecifications Engines Specifications EngineDimension EngineGeneral Information Drain Plug Remove this plug to drain water from the pump Pump ComponentsBasic Engine Initial ServicingMuffler Used to reduce noise and emissions Before Starting Inspection EngineOil Type SeasonSetup Operation Place the engine ON/OFF switch See in the on positionStarting the Engine Place the engine fuel valve lever See to the on positionStopping the Engine Always run engine at full speed while pumpingPlace the fuel shut-off lever See in the OFF position Pump Vacuum Test Maintenance PumpPump Vacuum Tester Do not run pump without waterEngine Maintenance Maintenance EngineEngine Maintenance Schedule First EveryDaily Engine AIR CleanerWeekly Engine OILSpark Arrester Removal Spark Arrester CleaningPump Storage StorageEngine Troubleshooting Troubleshooting EngineSymptom Possible Problem Solution Difficult to start Operation not satisfactoryTroubleshooting ENGINE/PUMP Pump TroubleshootingSymptom Possible Problem Solution Explanation of Code in Remarks Column Sample Parts ListQty Description Suggested Spare PartsPump Assembly 1889350351 72041000100181050820 0191150520Engine Service Parts 28462ZH8003 17620Z4H02017210ZE0822 17218ZE0505Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help
Related manuals
Manual 68 pages 41.17 Kb

QP2H specifications

The Multiquip QP2H is a high-performance portable generator designed to meet the power needs of both professionals and recreational users. Known for its reliability and robust design, this generator incorporates advanced technologies that ensure efficient operation, durability, and ease of use.

At the heart of the QP2H is its powerful Honda GX160 engine, which provides a maximum output of 2,000 watts. This engine is renowned for its fuel efficiency and low emissions, making it an environmentally friendly choice for users. The generator is equipped with a recoil start system that allows for easy ignition, even in challenging situations. Its lightweight and compact design make it highly portable, allowing users to transport it effortlessly to job sites, campsites, or outdoor events.

One of the standout features of the QP2H is its dual voltage capability. Users can switch between 120V and 240V output with a simple adjustment, making it versatile enough to power a variety of devices. This is particularly useful for contractors who need to run both standard tools and higher-voltage equipment. The generator also includes multiple AC outlets, providing flexibility for connecting multiple devices simultaneously.

Durability is a core characteristic of the QP2H. The generator's frame is built from strong steel, ensuring it can withstand the rigors of daily use in tough environments. It also features a protective roll cage that guards against impacts and enhances stability on uneven surfaces. The generator's design incorporates noise-reducing technology, which minimizes operational sound, making it more suitable for residential areas or noise-sensitive locations.

Another noteworthy aspect of the QP2H is its fuel tank capacity, which allows for extended run times. Users can expect up to 7 hours of continuous operation on a single tank, depending on the load. This efficiency is critical for users who need a reliable power source without the frequent interruptions of refueling.

In conclusion, the Multiquip QP2H stands out in the portable generator market due to its powerful engine, dual voltage capability, robust construction, and user-friendly design. Whether for construction sites, outdoor adventures, or emergency power backup, this generator provides the reliability and versatility needed to meet diverse power requirements. With the QP2H, users can rest assured knowing they have a dependable source of electricity wherever they go.
Top Page Image Contents