Optima Company Optima 3600O manual Maintenance, Cleaning the Appliance

Optima 3600

30

MAINTENANCE

CAUTION: Do not conduct maintenance on the appliance while it is operating or while hot

CLEANING THE APPLIANCE

The exterior surfaces and glass may be cleaned with a soft, non-abrasive cloth and water or a suitable, mild, non-abrasive cleaner.

Regularly:

❖Clean and remove any lint accumulations or debris from the grills and in any combustion and convection air passage ways.

❖Keep the appliance area free from combustible materials, such as paper, wood, clothing, gasoline and flammable solids, liquids and vapors.

❖Check for unusual noise, odor and operation of the appliance.

❖Check the vent terminal for any damage, or obstruction by plants or debris accumulation.

❖Visually check the height and color of the burner and pilot flames.

MAIN FLAME PILOT FLAME

Once a year:

❖Remove the glass door and clean the inside of the glass with a soft, non-abrasive cloth and water or a suitable, mild, non-abrasive cleaner.

❖Carefully remove the logs and gently brush off any loose carbon deposits. This job is best done

outside the house, wearing a dust mask.The logs are very fragile, take care not to break them. After cleaning, the logs must be replaced as per the instructions in this manual.

Once a year, have a qualified service technician:

❖Completely inspect the appliance and the venting system.

❖Clean and remove any lint accumulations or debris in the firebox, on the burners, on the pilot, at the

primary air opening, on the convection air blower and in any combustion and convection air passage ways.

❖Check the safety system of the gas valve.

WARNING : All parts removed or disturbed must be properly replaced after maintenance. Service and repair must be conducted by a qualified service person. If these instructions are not followed, a fire or explosion may result, causing property damage, personal injury or loss of life