Optima Company Optima 3600O manual General Information, Appliance Certification

Page 6

Optima 3600

6

GENERAL INFORMATION

APPLIANCE CERTIFICATION

This appliance is tested and certified to the following US and Canadian gas appliance standards.

-ANSI Z21.88b-2003 / CSA 2.33b-2003 Vented Gas Fireplace Heaters,

-CAN/CGA-2.17-M91 Gas-Fired Appliance fo Use at High Altitudes

Please contact Archgard Industries Ltd., if you have any questions regarding the certification of this appliance.

INSTALLATION CODES

This appliance must be installed by a qualified gas appliance installer. The installation must conform with the local codes or, in the absence of local codes, with the current National Fuel Gas Code, ANSI Z223.1/ NFPA 54, in the US or Installation Code, CSA-B149.1, in Canada. Electrical connections and grounding must be in accordance with local codes, if any, if not, follow the current CAN/CSA C22.1 in Canada and ANSI/NFPA 70 in the US. This appliance is certified for installation in a bedroom or a bedsitting room. This appliance is only for use with the type of gas indicated on the rating plate and may be installed in an aftermarket, permanently located, manufactured (mobile) home where not prohibited by local codes. See owner’s manual for details. This appliance is not convertible for use with other gases, unless a certified kit is used. This appliance must be installed in accordance with the current Standard CAN/CSA Z240 1411, Mobile Housing, or with the Manufactured Home Construction and Safety Standard Title 24 CFR, Part 3280, or when such a standard is not applicable, ANSI/NCSBCS A225.1/NFPA 501A, Manufactured Home Installations Standard. Only for direct discharge without duct connection. This appliance must be direct vented using listed Simpson Dura-Vent components.

SPECIFICATIONS

 

Natural Gas (NG)

Propane (LP)

 

 

 

Manifold Pressure

1.7-3.5 in. W.C. (0.4-0.9 kpa)

6.5-10.0 in. W.C. (1.6-2.5kpa)

 

 

 

Min. Supply Pressure for

4.5 in. W.C. (1.1 kPa)

11.0 in. W.C. (2.7 kPa)

Purpose of Input Adjustment

 

 

Orifice Size

#43 DMS

#54 DMS

 

 

 

Nominal Input Rating

17,000 - 24,000 BTU/hr

19,000 -24,000 BTU/hr

 

(4.98 –7.03 kW)

(5.57 - 7.03 kW)

Altitude

0 - 4,500 ft. (0 - 1372 m)

0 - 4,500 ft. (0 - 1372 m)

 

 

 

Primary Air Opening

closed

25% open

 

 

 

HIGH ALTITUDE INSTALLATION

When installing this appliance beyond 4500 ft. (1372 m) above sea level, the appliance must be properly de-rated and installed according to local codes, in the absence of local codes, with the current National Fuel Gas Code, ANSI Z223.1/ NFPA 54, in the US or Installation Code, CSA-B149.1, in Canada.

Image 6
Contents Optima Page Introduction Page Optima General Information Installation Codes SpecificationsHigh Altitude Installation Appliance CertificationAppliance Dimensions Installation Clearances Mantle & Sidewall Clearances Corner Frame DimensionsWiring Diagram Electrical CONNECTIONS, FAN SystemGlass Door Removal Removing the Glass DoorLOG Placement Place Rear LOG #146 on Pins and Burner AS Shown Place Front LOG #147 on Pins and Burner AS Shown Place Right LOG #148 and Embers AS Shown Locating GAS Fireplace Installation InstructionsPrecautions Vent Termination LocationGAS Connections Checking Inlet & Outlet GAS PressureChecking & Adjusting Pilot AIR Shutter AdjustmentConvertible Pilot Orifice Optional Wall Switch or Thermostat TOP / Rear Vent Conversion Allowable Approved Vent Components Venting ConnectionArchgard Venting Components Venting ComponentsSimpson DURA-VENT Components DescriptionDescription Venting Instructions Rear VentTypical Installation TOP VentTOP Vent Horizontal Venting ExampleVent Restrictors for TOP Vent Installations TOP Vent Vertical VentingFor Your SAFETY, Read Before Lighting Initial Operation Operation InstructionsSTART-UP Procedure Temporary SHUT-DOWN ProcedureComplete SHUT-DOWN Procedure Maintenance Cleaning the ApplianceTroubleshooting Symptom ActionOptima Servicing Servicing Under WarrantyAdjusting Primary AIR Changing Main Burner OrificeFuel Conversion Procedure Replacing Major GAS ComponentsImportant Information Natural GAS LPGReplacement Parts QTYBurner Orifice Valve Tray FAN Burner PAN Archgard Limited Warranty Page Warranty Registration Beatty Drive MISSION, B.C. Canada

Optima 3600O specifications

Optima Company has made a significant impact in the field of advanced technology solutions with its flagship product, the Optima 3600O. This device is a versatile tool designed for a range of applications, especially in industries that require precision, efficiency, and reliability. Targeted primarily at professional environments, the Optima 3600O integrates cutting-edge features and robust technologies, making it a competitive choice in its category.

One of the key features of the Optima 3600O is its powerful processing unit, designed to deliver swift performance even under demanding conditions. The device is equipped with a multi-core processor that ensures enhanced computational capabilities, enabling users to multitask effectively without experiencing lag or delays. Coupled with high-speed RAM, the system operates seamlessly, making it ideal for complex data analysis and real-time applications.

The Optima 3600O boasts a user-friendly interface that simplifies operations for both novice and experienced users. The device incorporates an intuitive touchscreen display, which provides clear visuals and easy navigation through various functions. Customizable settings allow users to tailor the user experience according to their specific needs, enhancing overall productivity.

In terms of connectivity, the Optima 3600O features advanced wireless and wired options, ensuring compatibility with a wide range of devices and networks. The integration of Bluetooth and Wi-Fi capabilities enables users to transfer data effortlessly while maintaining a stable connection. Furthermore, the device supports multiple data formats, making it versatile for integration with other systems.

Another noteworthy characteristic of the Optima 3600O is its built-in security features, which safeguard sensitive data against unauthorized access and cyber threats. These security measures include encryption protocols and user authentication processes, ensuring data integrity and confidentiality.

The durability of the Optima 3600O is also impressive. Designed to withstand tough working conditions, the device features a robust housing that protects against impacts, dust, and moisture. This resilience makes it suitable for use in various environments, including manufacturing, logistics, and research.

Overall, the Optima 3600O stands out as a reliable and efficient solution for professionals seeking high performance and versatility. With its state-of-the-art technologies and user-centric features, it is well-positioned to meet the evolving needs of industries worldwide, affirming Optima Company's commitment to innovation and quality in technology solutions.