Samsung ACC2400C, UCC2800C, UCC2400C, ACC2800C Cable type Double-insulation 2GShield Cable

Page 59

5Connect the O1 and O2 terminals of the centralized controller to the O1 and O2 terminals on the electrical component box as shown in figure.

CAUTION

Do NOT keep the centralized controller cables with a 220V cable because the centralized controller cables have low voltage.

Note Cable Specifications

Cable type

Double-insulation,

2G(Shield Cable)

 

Size of cables

0.75mm2~1.25mm2

 

 

Max. length of electric wires from the

1000m(1094 yd)

indoor unit to the centralized controller

 

 

 

6Connect the power cables.

Note Cable Specifications

Cable type

Double-insulation,

Power Supply

2G

 

 

Size of cables

0.75mm2~1.25mm2

208-230V~, 60Hz

 

 

 

7Reassemble the centralized controller.

CAUTION

The optional kits must be installed by an installation specialist.

Before installing the optional kits, ensure that you have turned off the main power.

All optional kits cables should be installed according to the national wiring rules and you must install them in the wall not to be touched by users.

ENGLISH

Centralized

Controller

208-230V~, 60Hz

E-59

Image 59
Contents Manuel D’UTILISATION & Manuel D’INSTALLATION Safety Precautions Contents View of the Unit Outdoor Unit Wired Remote Controller-Buttons and Display Wireless remote controller is an optional accessory Wireless Remote Controller-Buttons and DisplayCentralized Controller Indicators on the Unit For Wireless Remote Controller Only Getting Start Inserting the Wireless Remote Controller Batteries Using Wired Remote Controller Selecting the Automatic Operating Mode Cooling Your Room Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction To Cancel the On Timer Setting the On TimerTo Cancel the Off Timer Setting the Off TimerUsing Wireless Remote Controller Selecting the Automatic Operation Mode Cooling Your Room Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Setting the On Timer Setting the Off Timer Using the Centralized Controller Operating Recommendations Temperature and Humidity RangesCleaning Your Air Conditioner Bio-Pure Filter Installation Optional Wired Remote Controller Solving Common ProblemsModel SpecificationsIndoor Unit Dimensions Installation ManualPurging the Unit Indoor Unit Deciding on Where to Install the Air ConditionerSpace requirement when installing the indoor unit Basic Accessories Air Conditioner and AccessoriesIndoor Unit Installation Purging the Unit Connecting the Connection CordSUB PCB Wiring DiagramUnit Drain Hose InstallationTesting the drainage There are two refrigerant pipes of differing diameters Connecting the Indoor Unit Assembly PipingDepth a Cutting/Flaring the PipesTwo electric cables must be connected to the outdoor unit Connecting the Cables to the Outdoor UnitChecking Correct Grounding Fixing the Unit in Position Adding Refrigerant Connecting Up and Removing Air In the CircuitPerforming Leak Tests Insulation Installing the Front Panel Main PCB in the Indoor Unit Setting Up Option SwitchesSub PCB in the Indoor Unit PCB in the Wired Remote ControllerTransmitter Centralized Controller Option Place Component No State Main PCB Original Position of Option SwitchesAccessories Wired Remote Controller Installation OptionalCentralized Controller Installation Optional Cable type Double-insulation 2GShield Cable Receiver & Display Unit Installation Optional Bio-Pure Filter Installation Optional Controlling a Group With Wired Remote ControllerWith Centralized Controller Wired Remote Controller Checking and Testing OperationsWireless Remote Controller Meaning of Error Code TroubleshootingReceiver & Display Unit Explaining Operations to the Owner Memo Electronics