GE ASM14*, ASM24*, ASQ18 Before YOU Begin, Electrical Requirements, Tools YOU will Need

Page 9

Installation Instructions

Air Conditioner

Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: ge.com

BEFORE YOU BEGIN

Read these instructions completely and carefully.

•IMPORTANT — Save these

instructions for local inspector’s use.

•IMPORTANT — Observe all governing codes and ordinances.

•Note to Installer – Be sure to leave these instructions with the Consumer.

•Note to Consumer – Keep these instructions for future reference.

•Skill level – Installation of this appliance requires basic mechanical skills.

•Completion time – Approximately 1 hour

•We recommend that two people install this product.

•Proper installation is the responsibility of the installer.

•Product failure due to improper installation is not covered under the Warranty.

•You MUST use all supplied parts and use proper installation procedures as described in these instructions when installing this air conditioner.

ELECTRICAL REQUIREMENTS

Some models require a 115/120-volt a.c., 60 Hz grounded outlet protected with a

15-amp time delay fuse or circuit breaker.

The 3-prong grounding plug minimizes the possibility of electric shock hazard. If the wall outlet you plan to use is only a 2-prong outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall outlet.

Some models require 230/208-volt a.c., protected with a time delay fuse or circuit breaker. These models should be installed on their own single branch circuit for best performance and to prevent overloading house or apartment wiring circuits, which could cause a possible fire hazard from overheating wires.

9

CAUTION:

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not change the plug on the power cord of this air conditioner.

Aluminum house wiring may present special problems—consult a qualified electrician.

Do not install this air conditioner in a window if the type C bolts do not contact the window sill. See the Window Installation Instructions in this manual.

TOOLS YOU WILL NEED

Phillips head screwdriver

Adjustable wrench

 

 

Pencil

 

Ruler or tape measure

 

 

 

Level

 

Scissors or knife

 

 

 

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified service technician.

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Write the model and serial numbers here Model # Serial # Air ConditionersDo not use an adapter plug with this appliance Consumer Support Troubleshooting TipsGe.com USE of Extension CORDS-115-Volt models onlyRemote Control Instructions Safety InstructionsSupport ConsumerConsumer Support Air Direction-Side-to-Side Safety InstructionsConsumer Support Troubleshooting Care and cleaning of the air conditionerHow to Insert the Batteries Air FilterBefore YOU Begin Electrical RequirementsTools YOU will Need Parts Included Window Installation InstructionsWindow Requirements Storm Window RequirementsRemove the Front Grille if Attached Prepare the Case Remove the AIR Conditioner from the CaseInstall the Case Install the Security Bracket and the Foam TOP Window GasketInstall the Case in the Window Install the AIR Conditioner in the Case Finish the Wall Opening Through-the-Wall Installation Instructions-OptionalNormal Operating Sounds Troubleshooting Tips…We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration Installation Instructions GE Air Conditioner WarrantyWhat Is Not Covered GE Will ReplaceParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design StudioAcondicionadores de Aire Instrucciones de Operación Instalación Instrucciones de SeguridadInstrucciones Solución de problemas Apoyo al consumidor instalaciónSeguridad Instalación Consumidor Solucionar problemasApoyo al Control remotoModo Cool Frio Función de recuperación de pérdida de energíaModo de FAN Ventilador Control de la ventilación en algunos modelosConsumidor Instrucciones de SeguridadControl de la ventilación en algunos modelos Dirección del aire-de lado a ladoPrecaución no Opere el Cuidado y limpieza del acondicionador de aireApoyo al consumidor Solución Cómo insertar las bateríasRequisitos Electricos Antes DE IniciarPartes Incluidas Herramientas QUE Usted NecesitaráRequisitos Para LA Ventana Requisitos DE UNA Ventana DE TormentasRetire LA Parrilla Frontal SI Está Pegada Retire EL Acondicionador DE Aire DE LA Caja Prepare LA CajaInstale LA Caja DE LA VentanaInstale LA Caja EN LA Ventana Instale EL Acondicionador DE Aire EN LA Caja Importante Instrucciones de instalación a través de la pared-opcionalExterior Termine LA Abertura EN LA ParedSolucionar problemas Sonidos de operación normales Instrucciones de Seguridad Operación InstalaciónGE reemplazará Garantía de su acondicionador de aire de GELo que no está cubierto Un añoSolicite una reparación Apoyo al Consumidor Página Web de GE AppliancesGarantías ampliadas Piezas y accesorios

ASQ18, ASM24*, ASM14* specifications

GE ASM14*, ASQ18, ASM24* are part of General Electric's advanced suite of air compressor technologies designed for energy efficiency and reliability. These models cater to various industrial applications that require compressed air solutions, offering distinct features that enhance operational performance.

The ASM14* model is engineered with advanced airend technology, which ensures increased efficiency and reduced power consumption. This results in lower operational costs while providing consistent airflow. It employs a robust design that minimizes maintenance needs, making it a preferred choice for industries looking for reliable performance without frequent downtime.

ASQ18 offers high adaptability to different environmental conditions. This model features integrated variable speed drive (VSD) technology, which adjusts the compressor output based on the actual air demand. This not only optimizes energy consumption but also reduces wear and tear, extending the lifecycle of the unit. ASQ18 is perfect for facilities that experience fluctuating air requirements and emphasizes sustainability through reduced energy usage.

Similarly, the ASM24* model brings impressive capabilities to the table, particularly in terms of airflow and pressure characteristics. Its compact design allows easy integration into existing setups, and it boasts a low noise level, making it suitable for various applications where noise reduction is critical. This model incorporates easy-to-access components that simplify maintenance, ensuring operational continuity.

All three models utilize advanced monitoring technologies, providing real-time data on performance and operational health. This enables users to make informed decisions regarding maintenance schedules, ultimately enhancing productivity. Additionally, GE’s commitment to incorporating smart technologies ensures compatibility with predictive maintenance systems, allowing for proactive issue resolution.

In summary, the GE ASM14*, ASQ18, and ASM24* compressors stand out for their commitment to efficiency, sustainability, and reliability. With their advanced engineering, they cater to diverse industrial needs while helping businesses minimize operational costs and enhance productivity. Choosing these models means capitalizing on GE's legacy of quality and innovation in the compressed air sector.
Top Page Image Contents