GE ASD06* operating instructions Prepare the Window, Install the Case in the Window

Page 11

Installation Instructions

5PREPARE THE WINDOW

ALoosely attach the sill brackets to the support brackets using the 2 carriage bolts and 2 lock nuts.

Support bracket

Carriage bolt

Lock nut

Sill bracket

BOpen the window and mark the centerline of the window stool. Measure and mark 11″ to the left and right of the centerline.

Centerline

″ 11 ″ 11

6INSTALL THE CASE IN THE WINDOW

AAlign the inside edge of the sill brackets with the 11″ marks from the centerline and attach them to the window sill using 2 type B screws on each side.

BCarefully place the case on the window stool aligning the center front on the bottom with the centerline marked on the window stool. Close the window, making sure the window sash is behind the top mounting rail.

CUsing the larger diameter hole in the case, attach the brackets to the case using two

type D screws and 2 lock nuts on each side.

6INSTALL THE CASE IN THE WINDOW (CONT.)

DAdjust the carriage bolts and the lock nuts in each support so that the case is installed with a slight tilt to the outside. Use a level; about 1/3 bubble will be the correct case slant to the outside. Tighten the bolts.

CAUTION: DO NOT drill a hole in the base pan. The unit is designed to operate with approximately 1/2 ″ of water in the base pan.

ESecure the case to the window stool by using 3 type B screws.

FPull the accordion panels to each window sash track. Attach them on each side to the window sash and the window stool using 4 type C screws.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Write the model and serial numbers here Model # Serial # Ge.comSafety Precautions Ge.com USE of Extension CORDS-115-Volt models onlyCooling Descriptions Mode ControlAbout the controls on the air conditioner Temp ControlWater Drain Valve Vent ControlAir Direction-Side-to-Side Air Direction-Up and DownAir Filter Care and cleaning of the air conditionerGrille and Case Outdoor CoilsTools YOU will Need Before YOU BeginElectrical Requirements Parts Included Installation InstructionsStorm Window Requirements Window RequirementsPrepare the Window and the Case Remove the AIR Conditioner from the CasePrepare the Window Install the Case in the WindowInstall the AIR Conditioner in the Case Install a Support Bracket and the Foam TOP Window GasketBefore you call for service… Base pan Water drips outsideWater drips indoors Water collectsNormal Operating Sounds SafetyConsumer Support We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Air Conditioner WarrantyWhat Is Not Covered Real Life Design Studio Schedule ServiceParts and Accessories Consumer Support GE Appliances Website

ASD06* specifications

The GE ASD06* is a highly regarded air-cooled, scroll compressor that exemplifies advanced engineering and efficiency in HVAC applications. Known for its compact design and reliability, this model finds extensive use in both commercial and residential settings.

One of the key features of the GE ASD06* is its innovative scroll technology. Unlike traditional reciprocating compressors, the scroll design offers smoother operation with fewer moving parts, leading to enhanced durability and reduced maintenance costs. This technology allows for quiet performance, making it an excellent choice for applications where noise reduction is a priority.

Efficiency is another hallmark of the GE ASD06*. The compressor is designed to meet or exceed energy efficiency standards, contributing to lower energy consumption and reduced operating costs for users. Its high SEER (Seasonal Energy Efficiency Ratio) rating positions it as an environmentally friendly choice, promoting sustainable cooling solutions without sacrificing performance.

The GE ASD06* also incorporates smart control capabilities. This feature allows for precise monitoring and modulation of the compressor’s operation, ensuring optimal performance under varying load conditions. Users can benefit from enhanced comfort levels, as the system can adapt to changes in outdoor temperatures and indoor demand seamlessly.

In terms of installation, the GE ASD06* is designed to be versatile and straightforward. Its compact design allows for easy integration into a variety of setups, and it can be installed in confined spaces where traditional models may not fit. The unit is also equipped with a robust refrigerant system, compatible with modern environmentally-friendly refrigerants, further emphasizing its commitment to sustainability.

Safety features are integrated into the design of the GE ASD06*, including built-in thermal overload protection, which prevents damage from excessive heat and ensures long-term reliability. Additionally, its corrosion-resistant construction extends the lifespan of the unit, providing users with peace of mind regarding their investment.

In summary, the GE ASD06* stands out for its advanced scroll technology, energy efficiency, smart control capabilities, and ease of installation. With its durable design and user-friendly features, it serves as an excellent choice for those seeking a reliable and efficient air conditioning solution. It represents GE’s commitment to innovation in the HVAC industry, delivering exceptional performance while prioritizing sustainability and environmental responsibility.
Top Page Image Contents