Panasonic SC-PM23, RQTV0080-1P Radio, Manual tuning, Memory preset, FM allocation setting

Page 10
Press [PROGRAM].
Press [PLAY MODE] to select “MANUAL”.

Radio

RQTV0080

Numeric buttons

Manual tuning

1

Press [TUNER/BAND] to select “FM” or “AM”.

2

Press [PLAY MODE] to select “MANUAL”.

3

Press [ /REW/4] or [ /FF/¢] to select the

 

frequency of the required station.

 

 

 

 

 

 

 

 

ST ” is displayed when a stereo FM broadcast is being received.

To tune automatically

Press [/REW/4] or [/FF/¢] for a moment until the frequency starts changing rapidly. The unit begins auto tuning, stopping when it fi nds a station.

Auto tuning may not function when there is excessive interference.

To cancel auto tuning, press [/REW/4] or [/FF/¢] once again.

To improve FM sound quality

Press and hold [PLAY MODE] to display “MONO”.

To cancel

Press and hold [PLAY MODE] again until “MONO” disappears.

MONO is also canceled if the frequency is changed.

Turn off “MONO” for normal listening.

Memory preset

Up to 15 stations can be set in both the FM and AM bands.

Preparation

Press [TUNER/BAND] to select “FM” or “AM”.

Automatic presetting

Press and hold [PROGRAM] to start presetting.

Manual presetting

1

2 Press [/REW/4] or [/FF/¢] to tune to the required station.

3

4 Press numeric buttons to select a channel.

The station occupying a channel is erased if another station is preset in that channel.

5 Repeat steps 2 to 4 to preset more stations.

Selecting a preset station

Press numeric buttons to select the channel.

For channels 10 to 15 press [h10], then the two digits.

OR

1

Press [PLAY MODE] to select “PRESET”.

2

Press [ /REW/4] or [ /FF/¢] to select the

 

channel.

FM allocation setting

By main unit only

This system can also receive FM broadcasts allocated in 0.1 MHz steps.

To change the step to 0.1 MHz

1 Press and hold [TUNER/BAND].

After a few seconds the display changes to a fl ashing display of the current minimum frequency.

2 Continue to hold down [TUNER/BAND].

When the minimum frequency changes, release the button. To return to the original step, repeat the above steps.

After the setting is changed, any previously preset frequency will be cleared.

10

Image 10
Contents CD Stereo System SA-PM23 SystemSC-PM23 SB-PM23Listening caution Inside of productGetting started Inserting batteries into the remote control Placement of speakersDemo function Main unit Remote controlOverview of controls Refer to the numbers in parentheses for page referenceBasic play Play Mode functionDiscs Display functionAdvanced play Direct access playTo cancel Repeat playTPS Tape Program Sensor Cassette tapeRecording FM allocation setting Manual tuningMemory preset RadioUsing the sleep timer TimerSetting the clock Displaying the clockTo activate the timer Using the play or record timer˚ Play Sound adjustment External unitTroubleshooting guide Specifications MaintenanceFor a cleaner, crisper sound If the surfaces are dirtyAccessory Purchases Limited Warranty only for U.S.ACustomer Services Directory Service in Puerto RicoPanasonic Canada Inc Limited Warranty only for CanadaProduct Service Product informationPreparativos iniciales Colocación de los altavocesAparato principal ControlesParte superior del aparato Reproducción básica DiscosFunción de modo de reproducción Grabación de discos Cintas de caseteReproducción básica Grabación Otras operaciones básicasGrabación de emisoras en memoria Sintonización manualAjuste de la asignación de FM Clock ˚ Play TemporizadorPuesta en hora Visualización del relojCorporation of North America Company, Division of PanasonicAve de Infantería, Km Ambler Drive L1205CH1016