Panasonic RX-ES23 # #, Repeat play and Album play MP3, MP3 Intro play, Program play CD-DA MP3

Repeat play and Album play [MP3]

You can play ( ) or repeat play ( ) tracks only in the selected album.

Press [PLAY MODE] before or during playback to select the desired mode.

,	# #	#	]
	OFF (no indication) (====n

≥ ( ): play all tracks in the selected album one time.

≥ ( ): play all tracks in the selected album repeatedly.

≥You can select another album with album skip.

≥You cannot use random play with MP3.

MP3 Intro play

Intro functions allow you to start playing the 1st track of all album for 10 seconds each in the stop mode.

Press [INTRO] to start intro play.

Intro function is cancelled after playing the 1st track of last album in the disc. To stop during the process, press [INTRO] or [∫ TAPE/CD].

This unit can play MP3, a method of compressing audio without affecting audio quality.

ªWhen creating MP3 files to play on this unit Disc format: ISO9660 level 1 and level 2 (except for extended formats)

Title names and album names are not displayable on this unit.

ªLimitation on MP3

≥This unit is compatible with multi-session but if there are a lot of sessions it takes more time for play to start. Keep the number of sessions to a minimum to avoid this.

≥This unit cannot play files recorded using packet write.

≥If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3 files will be playable.

≥Depending on how you create MP3 files, they may not play in the order you numbered them or may not play at all.

MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia.

Program play [CD-DA] [MP3]

You can program up to 24 tracks.

On the main unit

Preparation:

Press [∫ TAPE/CD] to switch to CD stop mode.

[1]Turn [TIME/PRESET TUNETRACK SKIP ] to select the track.

[2]	Press [ MEMORY CLEAR].			C	D
	C: Programmed track
	D: Play sequence
[3]	Repeat step [1] and [2]	to
	program other tracks.
[4]	Press [CD 1/;] to start play.		e.g. MP3

On the remote control

Preparation:

Press [STOP ∫] to switch to CD stop mode.

[1]Press [PROGRAM/CLEAR].

“” appears on the display.

[2]Press the numeric button(s) to select the desired track.

For 2-digits number: press [S10] once, then the 2 digits.

For 3-digits number: press [S10] twice, then the 3 digits. Repeat this step to program other tracks.

[3]Press [CD 1/;] to start play.

The program remains intact even if play is stopped or the unit is turned off. “Cd-P” for [CD-DA]or “P” for [MP3] appears when play is stopped to indicate the contents are in the memory.

To	Operations
cancel*	Press and hold [ MEMORY
	CLEAR] in the CD stop mode
	until “CLEAR” is displayed.
	On remote control, press and
	hold [PROGRAM/	CLEAR].
check the program	Turn [TIME/PRESET TUNE
contents (while	TRACK SKIP	].
“Cd-P” for [CD-DA]or	On remote control, press
“P” for [MP3] is	[–/:] or [9/+].
displayed)

*The mode is also cancelled if the CD tray is opened.

Notes:

≥“FULL” is displayed

If 24 tracks have already been programmed.

≥“– –:– –” is displayed [CD-DA]

You can still program and play tracks if the total elapsed play time of the program exceeds 200 minutes.

9

RQT7912