TAPE ⁄ CD
Setting the Clock
This is a
[1]Press [
] to turn the unit on.
[2]Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
n , CLOCK # ON PLAY # | OFF | PLAY ] |
] Original display # OFF REC | # ON | REC (n |
[3]Within 10 seconds
Turn [TIME/PRESET TUNE 
TRACK SKIP 
] to set the time or on remote control, press
[4]Press [CLOCK/TIMER] to start the clock.
The original display is restored shortly after.
Note:
≥The clock may lose or gain some time over a period. Readjust if necessary.
To display the clock
Remote control only
Press [DISPLAY].
12
The Play and Record Timer
You can set the timer to come on at a certain time to wake you up (play timer) or to record a radio station (record timer).
Preparations:
Turn the unit on and set the clock.
For play timer, prepare the music source (tape/CD/radio) for listening, and set the volume.
For record timer, check the cassette’s erasure prevention tab (l 10) and load the cassette with the side for recording facing up. Tune to the radio station (l 7), and set the volume.
To set the start and finish times
[1]Press [CLOCK/TIMER] to select the desired timer function.
ON 
PLAY: to set the play timer
ON 
REC : to set the record timer
Proceed to step [2] before these indicators stop flashing (about 10 seconds).
[2]Turn [TIME/PRESET TUNE 
TRACK SKIP 
] to set the start time and then press [CLOCK/TIMER].
[3]Turn [TIME/PRESET TUNE 
TRACK SKIP 
] to set the finish time and then press [CLOCK/ TIMER].
The start and finish times are now set.
RQT7912