AJCQ12ACC
GE® ENERGY STAR® 115 Volt Built-in Room Air Conditioner
Dimensions (in inches)
Installation Information: A finished opening of
Note: Units should be caulked on all four sides of case to the building exterior to assure building integrity.
Two Wall Cases for Tenant Option Installation
When the air conditioner is offered as a tenant option, these wall cases provide protection against outside elements.
RAB47 – includes wall case, exterior grille and steel closure panels.
Make frame if desired or caulk between case and siding
Lintel |
|
OUTSIDE | |
| |
Caulking |
|
Drip Rail |
|
Plaster Line
Trim Molding (if desired)
INSIDE
RAB48 – includes wall case, exterior grille, steel closure panel and two layers of insulation.
Standard Wall Case RAB46
a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis. Provide firm anchoring with screws. Case can be fastened directly to brick or block walls with screws sunk in lead expansion shields.
For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.
Frame Construction | Flexible Mounting Position |
| |
Lintel |
|
| |
|
Fill open cells with mortar
Brick Block and Brick or insulation
Frame Construction
| Total volume and shelf | Listed by |
| area are calculated by | |
| Underwriters | |
| the Association of Home | |
| Laboratories | |
| Appliance Manufacturers’ | |
|
| |
R | standards. |
|
Specification Created 4/07 | 390249 |