GE AG_07 7, AG_12 12, AG_08 8, AG_10 10, 000 BTU models owner manual Safety Precautions

Page 3

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Safety Instructions

■Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Repair or replace immediately all electric service cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the mode control to OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

Operating Instructions Installation

HOW TO CONNECT ELECTRICITY

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

Instructions Troubleshooting Tips

Customer Service

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Pub. No -7390 JR 3828A30036QTwo easy ways to register your appliance GE & You, a Service PartnershipSafety Precautions USE of Adapter Plugs -115-Volt models only Read and follow this Safety Information carefullyTemp Controls Mode ControlsAbout the controls on the air conditioner ControlsVent Control Air Direction Side-to-SideAir Direction Up and Down Air Filter Care and cleaning of the air conditionerGrille and Case Outdoor CoilsTools You Will Need Preparing to install the air conditionerBefore You Begin Electrical RequirementsParts Included Window Installation InstructionsStorm Window Requirements Window RequirementsRemove the Air Conditioner From the Case Prepare the Window and the CaseMounting rail Install the Case in the WindowInstall the Air Conditioner in the Case Normal Operating Sounds Before you call for service…Safety Instructions CustomerService We’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration For The Period Air Conditioner WarrantyGE Will Replace What GE Will Not CoverService Telephone Numbers
Top Page Image Contents