GE AGM05 owner manual Safety Precautions, Consumer Support Troubleshooting Tips

Page 2

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

Installation Instructions Operating Instructions

■ Use this appliance only for its intended purpose as described in this Owner’s Manual.

■This air conditioner must be properly installed in accordance with the Installation Instructions before it is used.

■Never unplug your air conditioner by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

■Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

■Turn the unit OFF and unplug your air conditioner before making any repairs or cleaning.

NOTE: We strongly recommend that any servicing be performed by a qualified individual.

■For your safety…do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

■All air conditioners contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

HOW TO CONNECT ELECTRICITY

Consumer Support Troubleshooting Tips

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Power cord includes a current interrupter device. A test and reset button is provided on the plug case. The device should be tested on a periodic basis by first pressing the TEST button and then the RESET button. If the TEST button does not trip or if the RESET button will not stay engaged, discontinue use of the air conditioner and contact a qualified

service technician.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The air conditioner should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.

This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.

See the Installation Instructions, Electrical Requirements section for specific electrical connection requirements.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Air Conditioners 3828A21031CSafety Precautions Consumer Support Troubleshooting TipsInstallation Instructions USE of Extension CORDS-115-Volt models onlySupport Troubleshooting Tips Installation Remote ControlCool Mode Troubleshooting Tips Consumer SupportPower Outage Recovery Feature FAN ModeConsumer Support SafetyInstructions Air Direction Normal Operating Sounds Care and cleaning of the air conditionerAir Filter Tools YOU will Need Before YOU BeginElectrical Requirements Installation Instructions Parts IncludedPrepare the Window Window RequirementsStorm Window Requirements Install the Side Accordion Panels Install the AIR Conditioner in the WindowInstall the Security Bracket Install a Support Bracket and the Foam TOP Window GasketTroubleshooting Tips Problem Possible Causes What To DoWe’ll Cover Any Appliance. Anywhere. Anytime Consumer Product Ownership Registration GE Will Replace GE Air Conditioner WarrantyWhat Is Not Covered Warrantor General Electric Company. Louisville, KYConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design StudioAcondicionadores de Aire ¡ADVERTENCIA Operación InstalaciónOperación USO DE Cables DE EXTENSIÓN-Modelos de 115 voltios solamenteControl remoto Consumidor Solucionar problemasSeguridad Modo de FAN Ventilador Función de recuperación de pérdida de energíaModo Cool Frio Dirección del aireControles de modo Solucionar problemasServicio al consumidor Controles de temperaturaOperación Precaución no Opere el Instalación Servicio al consumidor Solucionar problemasCuidado y limpieza del acondicionador de aire Antes DE Comenzar Requistios EléctricosHerramientas QUE Necesitará Partes IncluidasPrepare LA Ventana Requisitos Para LA VentanaRequisitos DE UNA Ventana DE TormentasInstale LOS Paneles Laterales DE Acordeon Instale EL Soporte DE Seguridad Solucionar problemas Problema Causas posibles Qué hacerSonidos de operación normales La bandejaNotas GE reemplazará Garantía de su acondicionador de aire de GESeguridad Operación Lo que no está cubiertoGarantías ampliadas Servicio al consumidor Página Web de GE AppliancesSolicite una reparación Piezas y accesorios

AGM05 specifications

The GE AGM05 is a cutting-edge aircraft engine that represents the pinnacle of engineering in the field of aviation technology. Designed for the next generation of commercial jetliners, the AGM05 boasts an array of features, technologies, and characteristics that make it a standout in the competitive aerospace market.

One of the main features of the AGM05 is its advanced materials composition. Utilizing lightweight composites and durable alloys, the engine offers significant weight savings without compromising structural integrity. This reduction in weight contributes to improved fuel efficiency, allowing airlines to reduce operational costs while minimizing their carbon footprint.

The AGM05 incorporates a state-of-the-art fan design that enhances performance and efficiency. With a larger diameter fan and optimized blade geometry, the engine delivers higher thrust levels at lower fuel consumption rates. This design not only improves takeoff and climb performance but also ensures quieter operations, aligning with the industry's push for greener aviation solutions.

In terms of technology, the AGM05 features a sophisticated digital control system that utilizes advanced algorithms for optimal engine management. This system monitors various parameters in real time, allowing for precise adjustments to power settings, fuel flow, and environmental controls. The result is a smoother flight experience with enhanced reliability and safety.

Another notable characteristic of the AGM05 is its modular design. This aspect facilitates easier maintenance and quicker turnaround times for airlines. Engineers can access components swiftly, reducing downtime and ensuring that aircraft can return to service promptly. This is particularly important in the highly competitive commercial aviation sector, where operational efficiency translates to higher profitability.

Moreover, the AGM05 is designed with a focus on sustainability. The engine's lower emissions profile meets and often exceeds the stringent regulatory requirements set forth by aviation authorities. This commitment to eco-friendly technology positions the AGM05 as a leader in the global trend toward greener air travel.

In summary, the GE AGM05 aircraft engine showcases outstanding features such as advanced materials, superior fan design, a cutting-edge digital control system, and modularity for maintenance ease. With its emphasis on fuel efficiency and sustainability, the AGM05 not only meets the demands of modern airlines but also sets a high standard for the future of aviation technology. As the industry continues to evolve, the AGM05 is poised to play a pivotal role in shaping the next generation of air travel.
Top Page Image Contents