GE 49218 Built-in units, RAD4A1 Drain Kit, RAB47/48 Tenant Option Wall Cases for J Chassis

Built-in units

RAD4A1 Drain Kit

Internal/External Drain Kit

Drain kit for use on “J” series wall cases. For more positive control of condensate water, the RAD4A1 drain kit routes condensate to the exterior or to the interior of the building through the wall case. Suitable provision (field applied) should be made to connect the drain tube to a drain system in the building. Drain tube assembly is 1/2" O.D. copper.

Note: The RAG14E exterior grille is NOT compatible with the RAD4A1 EXTERNAL drain tube. Use of this grille would require the use of the INTERNAL TUBE configuration to drain the unit.

RAK65A1 Window Installation Kit for “J” Series Built-in Units

Adapts built-in wall case for window installation. (This kit is included in “J” series units designed for window installation.) Window opening width—26-7/8" to 40". Window opening height —16-3/8" minimum.

RAB46 Standard Wall Case for “J” Chassis Built-in Unit

Solid-sided wall case fabricated of galvanized steel with baked enamel (beige) finish. Welded areas are coated with a sealing compound to help resist rust and corrosion. Polymer gasket surrounds opening to assure tight weather seal. Aluminum grille (RAG13) is included. Panels on interior and between case and grille provide weather protection prior to installation of chassis.

RAB47/48 Tenant Option Wall Cases for “J” Chassis

When the air conditioner is offered as a tenant option, these wall cases provide protection against outside elements.

RAB47—includes wall case, exterior grille, weather panel and steel closure panel.

RAB48—includes wall case, exterior grille, insulated steel indoor closure panel and insulated outdoor panel.

RAK66 Wall Case Insulation Kit

Kit consists of an insulated steel front cover and a black-painted ESP rear cover. When installed in a RAB46 standard wall case, the kit will protect room from the outside elements prior to installation of a GE “J” series chassis.

16