Air Deflector Kit, Duct Adapter

Zoneline units

7-3/32"

6-1/2"

7-3/32"

6-1/2"

RAK40 (AZ Series*)

Air Deflector Kit

Kit adapts AZ chassis for use with older GE architectural grilles. The aluminum deflectors are installed to the condenser end sheet flanges to prevent condenser airflow recirculation. The kit also allows some custom (non-standard) rear grilles to be used, provided they have sufficient open area.

RAK605 (AZ Series*—2100 and 3100 only)

Duct Adapter

(Not for 2600 and 5100 Series)

The RAK605 duct adapter is attached to the top of the wall case to allow the air from the Zoneline to heat or cool an adjacent room. Duct extension RAK601 can be applied to right or left of the adapter. (Zoneline 5100 Series not approved for ducted application).

RAK6052 (AZ Series*—2200, 2500, 2800, 3200, 3500, and 3800 only)

Duct Adapter

(Not for 5200, 5500 or 5800 Series)

The RAK6052 duct adapter is attached to the top of the wall case to allow the air from the Zoneline to heat or cool an adjacent room. Duct extension RAK601 can be applied to right or left of the adapter. (Zoneline 5200 and 5500 Series not approved for ducted application).

RAK601/602 (AZC and AZ Series*—2100, 2200, 2500, 2800, 3100, 3200, 3500 and 3800 only)

Duct Extension, Register and Trim Flange

RAK601 is a 44"-long duct and includes an air register and trim flange for the secondary space. If two extensions are made from one RAK601 duct, an additional air register and trim flange can be ordered separately as an RAK602–reducing the cost of the installation. For use with RAK605 and RAK6052.

*A-B Series: Zonelines built before 1987 – Zoneline I, II, III, and IV; AZC Series: Zonelines built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 3000, 4000, 5000; AZ Series: Zonelines built after 1992 – Zoneline 2100, 3100, 2600, 5100 / Zoneline 2200, 3200, 5200 / Zoneline 2500, 3500, 5500 / Zoneline 2800, 3800, 5800.