GE 49218 specifications RAK1072 Hotpoint Chassis Sleeve Adapter, RAK1082 Whirlpool Sleeve Adapter

Built-in units

RAK1072 Hotpoint Chassis Sleeve Adapter

Kit adapts Hotpoint ACXB 10 and ACXB 11 wall case (used with ACTB chassis) to the sloped front or rounded front “J” chassis. Existing case dimensions are 25-3/4" W, 16-7/8" H, 18-5/8" D. All needed gaskets and hardware, including the outdoor grille, are included.

RAK1082 Whirlpool Sleeve Adapter

Kit adapts Whirlpool Type 23W wall case for installation of the sloped front or rounded front “J” model chassis. The Whirlpool case dimensions are 25-7/8" W, 16-1/2" H, 23-1/8" D.

RAK1102/RAB30 (F Model Sleeve) Adapter

Kit adapts RAB30 wall case for installation of the sloped front or rounded front “J” model chassis. The RAB30 case dimensions are 26" W, 18" H, 24" D.

RAK123A64 Fedders Sleeve Adapter

Kit adapts Fedders “A” wall case for installation of the “J” wall case (includes outdoor grille) and “J” model chassis. Existing Fedders wall case dimensions are 27" W, 16-3/4" H, 16-3/4" D.

Kit consists of four gaskets which are applied to the wall case to assure a tight weather seal between the two cases.

18