Model SL-7001, Features, Requirements | Heath Zenith instruction

Solar Powered Motion Sensor Light

Model SL-7001

FEATURES

•Turns on light when motion is detected.

•Automatically turns light off.

•Photocell keeps the light off during daylight hours.

•Battery Protection Circuitry. Unit will shut down when battery is low. Unit will automatically resume operation when battery is recharged to a safe level.

REQUIREMENTS

•Do not turn the light on before the battery is fully charged. Charge the battery by keeping the switch in the OFF position and the solar collector pointed directly at the noon sun for 3 sunny days. If not fully charged, the unit will not work.

•When FULLY charged, the solar light will operate a maximum of 15 days without sunlight. Actual operating time will vary depending upon how frequently the light is triggered.

UNPACKING

Be sure to remove all contents from packaging and verify all items are present before assembling this light ﬁxture. This package includes the following items:

1. Solar Light Fixture

2. Solar Panel

Battery

Case

Light

Sensor

3. Mounting Screws (2 sizes)

Tapered Screw (3)

Round Head Screw (2)

INSTALLATION

For best performance, mount the ﬁxture about 8 feet (2.4 m) above the ground.

Mounting Holes (3)

Three Mounting Holes for Solar Panel Base

1.Mount solar panel base on a solid surface using three tapered screws. Adjust the panel to point directly at the noon sun. Avoid obstructions such as trees or buildings that may block sun light. Allow for enough wire to reach the case. Keep ball joint at bottom.

Note: You will want to re-aim the solar panel as the seasons change to keep it pointed directly at the noon sun.

6 3/4"	Mounting
	Holes (2)

2.Mount the battery case on a solid surface using two round-head screws and the keyholes on the back of the case.

3.Adjust sensor. For proper operation, the sensor head must be rotated so that the sensor controls face downward as shown below.

IMPORTANT: The controls must face downward to avoid damage from rain. If controls face upward, move sensor to the original down position, rotate 180°, then raise to the position shown below.

Light Joint Clamps	Light

Battery Case

Sensor

Lense Removal

Tab

Sensor Joint

Clamp

Controls

4.Plug the solar panel cable into the bottom of the battery case. IMPORTANT: Allow the battery to charge with three days of sunshine before testing.

595-5291-07

SL-7001 specifications

The Heath Zenith SL-7001 is a sophisticated and reliable outdoor motion-activated light that combines advanced technology with practical functionality, making it an ideal choice for home security and convenience.

One of the standout features of the SL-7001 is its high-performance motion sensor. Equipped with a 180-degree detection angle and an extended range of up to 30 feet, this sensor ensures that any movement within its perimeter is promptly detected. This wide coverage area is particularly beneficial for large yards or driveways, providing maximum safety and visibility during nighttime hours.

The SL-7001 comes with an adjustable sensitivity setting, allowing users to customize the detection parameters to suit their environment. Homeowners can fine-tune the sensor to avoid false alarms caused by small animals or passing cars, ensuring that it only activates when necessary. Additionally, the adjustable time setting can be configured for anywhere between 5 seconds to 10 minutes, allowing the light to remain illuminated for a predetermined time after activation, which is ideal for various outdoor scenarios.

Another technological innovation integrated into the Heath Zenith SL-7001 is its dual-light design. This model features two separate heads, each of which can pivot independently, allowing users to direct the light exactly where it is needed. This versatility maximizes illumination in key areas around the home, enhancing security and visibility.

The SL-7001 also boasts weatherproof construction, ensuring durability and performance in a range of outdoor conditions. Its sturdy housing protects the internal components from rain, snow, and extreme temperatures, making it suitable for year-round use.

Moreover, the Heath Zenith SL-7001 is equipped with energy-efficient LED bulbs. These bulbs consume significantly less energy compared to traditional incandescent options, leading to reduced energy bills and a lower environmental footprint. The long lifespan of LED technology also means less frequent bulb replacements, adding to the product's overall convenience and cost-effectiveness.

Installation of the SL-7001 is straightforward, with comprehensive instructions included for a hassle-free setup. The unit can be mounted on a variety of surfaces, making it a versatile choice for different locations around the home.

In conclusion, the Heath Zenith SL-7001 is an exemplary model of modern outdoor lighting, combining advanced motion-sensing technology, durability, and energy efficiency. Its user-friendly features make it a valuable addition to any home, enhancing safety and providing peace of mind.