Heath Zenith SL-7001 manual Battery Replacement, Specifications

Page 3

BATTERY REPLACEMENT

This solar light contains a rechargeable battery that can be replaced if needed. To replace the battery follow the steps below.

IMPORTANT: The sealed lead-acid battery must be recycled or disposed of properly.

1.Remove rear battery cover. Press in the two catch releases on the cover and remove the cover.

2.Remove rechargeable battery.Slide battery out of case and remove the wire connectors from the battery.

3.Replace battery. Connect the RED wire connector to the positive (+) terminal and the BLACK wire connector to the negative (-) terminal.

4.Replace battery cover.Insert the two tabs on the cover into the slots on the back of the case. Press the cover against the case until the two catch releases snap into place.

IMPORTANT: Keep sensor switch in the “OFF” position for three days to allow the battery to fully charge before testing.

Tab Slots

Positive Wire

Negative Wire

Battery

Cover

Rechargeable

Battery

Battery Cover Catch Release

SPECIFICATIONS

Range

Up to 60 ft. (18.3 m); [varies with

 

surrounding temperature]

Sensing Angle

Up to 110°

Lamp

15 watt, 6 volt halogen

Battery Type

Sealed lead acid, 6 V 6.0 A-Hr.

On Time

30 seconds, re-triggerable

Full Charge on Time

Up to 1 hour

IMPORTANT:Replace lamp only with same type lamp, 20 watts or less. DO NOT reverse the battery wires. Damage to the unit will result. Like any lead-acid battery, this battery must be disposed of properly.

DESA Specialty Products™ reserves the right to dis- continue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

595-5291-07

3

Image 3
Contents Requirements FeaturesInstallation Model SL-7001Things to Remember Test and AdjustmentAdjustment of Coverage Area OperationSpecifications Battery ReplacementSymptom Possible Cause Solution Troubleshooting GuideTechnical Service No Service Parts Available for this ProductRequisitos Modelo SL-7001Instalación CaracterísticasRegulación del Área de Cobertura Prueba Y AjusteEspecificaciones FuncionamientoPuntos QUE SE Deben Recordar Cambio DE LA BateríaNo hay piezas de servicio disponibles para este producto Guía DE Análisis DE AveríasServicio Técnico No enviar los productosDéballage Modèle SL-7001Caractéristiques ExigencesEssai ET Réglage Réglage de la Zone de CouvertureDesserrer la vis de blocage de la rotule Fiche Technique Remplacement DE LA PileFonctionnement RappelAucune pièce de rechange n’est disponible pour ce produit Service TechniqueGuide DE Dépannage Nenvoyez pas de produits
Related manuals
Manual 8 pages 14 Kb

SL-7001 specifications

The Heath Zenith SL-7001 is a sophisticated and reliable outdoor motion-activated light that combines advanced technology with practical functionality, making it an ideal choice for home security and convenience.

One of the standout features of the SL-7001 is its high-performance motion sensor. Equipped with a 180-degree detection angle and an extended range of up to 30 feet, this sensor ensures that any movement within its perimeter is promptly detected. This wide coverage area is particularly beneficial for large yards or driveways, providing maximum safety and visibility during nighttime hours.

The SL-7001 comes with an adjustable sensitivity setting, allowing users to customize the detection parameters to suit their environment. Homeowners can fine-tune the sensor to avoid false alarms caused by small animals or passing cars, ensuring that it only activates when necessary. Additionally, the adjustable time setting can be configured for anywhere between 5 seconds to 10 minutes, allowing the light to remain illuminated for a predetermined time after activation, which is ideal for various outdoor scenarios.

Another technological innovation integrated into the Heath Zenith SL-7001 is its dual-light design. This model features two separate heads, each of which can pivot independently, allowing users to direct the light exactly where it is needed. This versatility maximizes illumination in key areas around the home, enhancing security and visibility.

The SL-7001 also boasts weatherproof construction, ensuring durability and performance in a range of outdoor conditions. Its sturdy housing protects the internal components from rain, snow, and extreme temperatures, making it suitable for year-round use.

Moreover, the Heath Zenith SL-7001 is equipped with energy-efficient LED bulbs. These bulbs consume significantly less energy compared to traditional incandescent options, leading to reduced energy bills and a lower environmental footprint. The long lifespan of LED technology also means less frequent bulb replacements, adding to the product's overall convenience and cost-effectiveness.

Installation of the SL-7001 is straightforward, with comprehensive instructions included for a hassle-free setup. The unit can be mounted on a variety of surfaces, making it a versatile choice for different locations around the home.

In conclusion, the Heath Zenith SL-7001 is an exemplary model of modern outdoor lighting, combining advanced motion-sensing technology, durability, and energy efficiency. Its user-friendly features make it a valuable addition to any home, enhancing safety and providing peace of mind.