Test and Adjustment, Operation | Heath Zenith SL-7001 specification

TEST AND ADJUSTMENT

NOTE: Sensor has a 30 second warm up period before it will detect motion. When switching modes wait 30 seconds.

1.Slide the sensor switch to the TEST (center) posi- tion.

2.Place the RANGE adjustment in the medium position (halfway between MIN and MAX position).

RANGE

TEST

OFF AUTO

MIN MAX

Bottom of Sensor

3. Loosen the clamp screw in the sensor ball joint.

Ball Joint

Clamp Screw

4.Walk through the coverage area noting when the lights turn on. Gently move the sensor head up, down, or sideways to change the coverage area. Note: Wait 5 to 10 seconds after light turns off to retest.

Adjustment of Coverage Area

The sensor detects “motion” by the movement of heat (body heat) across the coverage area.However, following are examples of objects that also produce heat and can cause the sensor to false trigger:

•	Pools of Water	•	Air Conditioners
•	Dryer Vents	•	Fenced-In Animals
•	Heating Vents	•	Automobile Trafﬁc

If you suspect that a heat source of this type is falsely triggering the sensor, try reducing the RANGE or aiming the sensor away from the heat source in question.

Note: The detector is less sensitive to motion directly towards it and more sensitive to across motion.

Motion	Motion
	Sensor
Least Sensitive	Most Sensitive

OPERATION

Place the sensor switch in AUTO for normal operation.If the light is not needed, put the switch in the OFF position.

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	30 Seconds		x

Aim Sensor Down for	Aim Sensor Higher for
Short Coverage	Long Coverage
	110°
8 ft.
(2.4 m)

60 ft.

(18.3 m)

Maximum Range	Maximum
	Coverage Angle

5.Increase RANGE only as needed. A larger RANGE setting may cause false triggering and reduce battery life.

6.Secure the sensor into position by tightening the clamp screw. Do not overtighten the screw.

7.After dark, adjust the light to cover desired area.

THINGS TO REMEMBER

•Periodically clean the solar panel with a soft cloth and warm water.Do not hose spray.Keep the collector clear of snow and leaves. Make sure trees and other objects do not block sunlight from the panel.

•If not to be used for several weeks, turn the unit OFF. Store it with the panel connected and where the panel can gather sunlight.

•Solar collection is only effective in direct sunlight.Every hour the light is on requires a minimum of 16 hours of sunlight charging. Solar panels collect less than 10% of the sun’s energy. Light bulbs convert this energy to light at 5% efﬁciency.

•Several days of use with overcast skies may discharge the battery.Because of the battery protection circuit, the light will not work until the battery is fully recharged.

•This light is supplied with a 15 Watt, bi-pin, halogen bulb. For replacement, use Heath®/Zenith model SL- 7000-A1-A or equivalent. Note: Using a larger bulb will decrease battery life.

2	595-5291-07

SL-7001 specifications

The Heath Zenith SL-7001 is a sophisticated and reliable outdoor motion-activated light that combines advanced technology with practical functionality, making it an ideal choice for home security and convenience.

One of the standout features of the SL-7001 is its high-performance motion sensor. Equipped with a 180-degree detection angle and an extended range of up to 30 feet, this sensor ensures that any movement within its perimeter is promptly detected. This wide coverage area is particularly beneficial for large yards or driveways, providing maximum safety and visibility during nighttime hours.

The SL-7001 comes with an adjustable sensitivity setting, allowing users to customize the detection parameters to suit their environment. Homeowners can fine-tune the sensor to avoid false alarms caused by small animals or passing cars, ensuring that it only activates when necessary. Additionally, the adjustable time setting can be configured for anywhere between 5 seconds to 10 minutes, allowing the light to remain illuminated for a predetermined time after activation, which is ideal for various outdoor scenarios.

Another technological innovation integrated into the Heath Zenith SL-7001 is its dual-light design. This model features two separate heads, each of which can pivot independently, allowing users to direct the light exactly where it is needed. This versatility maximizes illumination in key areas around the home, enhancing security and visibility.

The SL-7001 also boasts weatherproof construction, ensuring durability and performance in a range of outdoor conditions. Its sturdy housing protects the internal components from rain, snow, and extreme temperatures, making it suitable for year-round use.

Moreover, the Heath Zenith SL-7001 is equipped with energy-efficient LED bulbs. These bulbs consume significantly less energy compared to traditional incandescent options, leading to reduced energy bills and a lower environmental footprint. The long lifespan of LED technology also means less frequent bulb replacements, adding to the product's overall convenience and cost-effectiveness.

Installation of the SL-7001 is straightforward, with comprehensive instructions included for a hassle-free setup. The unit can be mounted on a variety of surfaces, making it a versatile choice for different locations around the home.

In conclusion, the Heath Zenith SL-7001 is an exemplary model of modern outdoor lighting, combining advanced motion-sensing technology, durability, and energy efficiency. Its user-friendly features make it a valuable addition to any home, enhancing safety and providing peace of mind.