Heath Zenith SL-9525 manual Installation, Wall Mount Eave Mount, Wire the Light Control

Page 2

INSTALLATION

For easy installation, select an existing light with a wall switch for replacement.

Drill out the holes if needed to mount the backplate to the junc- tion box.

Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

 

White to

Gasket

White

 

 

Black to

Black

Junction box ground wire to green ground screw on fixture.

Wall Mount

Eave Mount

For under eave installation, the sensor head must be rotated as shown in the next two steps for proper opera- tion and to avoid the risk of electrical shock. Also for proper under eave operation, remove the protective backing from the Light Shield and stick on as shown below.

For eave mount only:

Swing the sensor head towards2345678901234567the clamp screw

joint.Controls

Clamp Screw

Then rotate the sensor head clockwise 180° so the controls face down.

Controls

Light Shield

Opening

Controls

If the sensor pops out of the ball joint, loosen the clamp screw and push the sensor back into the ball joint. Tighten the clamp screw when done.

WIRE THE LIGHT CONTROL.

Turn power off at the fuse or circuit breaker.

Remove the existing light fixture.

Route the Light Control’s wires through the large gasket hole.

MOUNT THE LIGHT CONTROL.

Align the Light Control cover plate and cover plate gasket. Secure with the screws provided.

Align the three slots in the decorative shell with the lamp holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

Shell Slot

If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and Lock Nut electrical shock, keep lamp holders 30° below horizontal.

 

Keep lamps at least

 

1" (2.5 cm) from the

Lens

sensor. Do not allow

the lamps to block

 

 

the lens.

Adjust the lamp holders by loosening the lock nuts but do not rotate the lamp holders more than 180° from the factory setting. When screwing in the floodlamps, do not overtighten.

2

595-5612-08

Image 2
Contents Operation FeaturesMode Switching Summary Model SL-9525Wall Mount Eave Mount InstallationWire the Light Control Mount the Light ControlMaximum Range Test and AdjustmentSpecifications Coverage AngleNo Service Parts Available for this Product Troubleshooting GuideTechnical Service TEN Year Limited WarrantyFuncionamiento Modelo SL-9525Instale EL Control DE LUZ InstalacionMontaje en pared Montaje en alero Conecte EL Control DE LUZAlcance Máximo Angulo de Prueba Y AjusteEspecificaciones Lo menos sensibleNo enviar los productos Guia DE Investigacion DE AveriasServicio TƒCNICO No hay piezas de servicio disponibles para este productoModèle SL-9525 RŽsumŽ du mode de commutationFonctionnement CaractŽristiquesBlanc /blanc CåBLAGE DE LA Commande DÕƒCLAIRAGEMontage mural Montage sous Avant-toit Portée maximale Angle de Essais ET RƒGLAGESFiche Technique Le moins sensible Le plus sensibleNenvoyez pas de produits Service TechniqueGuide DE DƒPANNAGE Aucune pice de rechange nÕest disponible pour ce produit

SL-9525 specifications

The Heath Zenith SL-9525 is a versatile and innovative motion-activated light designed to enhance security and convenience in residential and commercial settings. This outdoor motion light serves as a reliable solution for illuminating dark areas and deterring potential intruders, while its modern design seamlessly blends with various architectural styles.

One of the standout features of the SL-9525 is its advanced motion detection technology. Equipped with a passive infrared (PIR) sensor, the light can detect movement in its range of up to 180 degrees, with a detection distance of up to 30 feet. This ensures that any motion detected within this radius triggers the light, providing illumination exactly when needed.

The SL-9525 also allows for customizable settings, making it user-friendly and adaptable to different environments. Users can adjust the sensitivity of the motion detection, ensuring that the light is triggered only when necessary, thereby reducing the chances of false alarms due to passing animals or gusts of wind. Additionally, the fixture includes a timer setting, allowing users to control how long the light remains illuminated after activation, with options typically ranging from 1 to 10 minutes.

In terms of construction, the Heath Zenith SL-9525 is designed with durability in mind. Made from high-quality, weather-resistant materials, it is built to withstand varying environmental conditions, ensuring longevity and consistent performance. The fixture is also equipped with a stylish and contemporary design, often featuring a sleek black finish that enhances its aesthetic appeal.

Another notable characteristic of the SL-9525 is its energy efficiency. Utilizing LED technology, it not only provides bright illumination but also consumes significantly less power compared to traditional incandescent bulbs. This energy-efficient design helps in reducing electricity bills while contributing to a more sustainable environment.

Overall, the Heath Zenith SL-9525 is an outstanding choice for anyone looking to enhance their outdoor security lighting. With its advanced motion detection capabilities, customizable settings, durable construction, and energy-efficient operation, it stands out as a reliable and effective solution for illuminating exterior spaces. Whether used for home security, walkway lighting, or garage illumination, the SL-9525 ensures safety and convenience, making it a valuable addition to any property.