Heath Zenith SL-9525 manual Troubleshooting Guide, Technical Service, Do Not Send Products

Page 4

TROUBLESHOOTING GUIDE

SYMPTOM

 

POSSIBLE CAUSE

 

 

 

 

 

Lights will not come

1. Light switch is turned off.

on.

 

2. Flood light

is

loose or

 

 

 

burned out.

 

 

 

 

3.

Fuse is blown or circuit breaker is

 

 

 

turned off.

 

 

 

 

4.

Daylight turn-off is in effect (re-

 

 

 

check after dark).

 

 

 

5.

Incorrect circuit wiring, if this is a

 

 

 

new installation.

 

 

 

6.

Re-aim the sensor to cover de-

 

 

 

sired area.

 

 

Lights come

on

1. Light Control may be installed in

in daylight.

 

 

a relatively dark location.

 

 

2.

Light Control is in Test.

 

 

 

(Set control switch to an

 

 

 

ON-TIME position).

 

 

 

 

 

Lights come on for

1. Light Control

may

be sensing

no apparent

rea-

 

small animals or automobile traf-

son.

 

 

fic (re-aim sensor).

 

 

 

2.

Range is set too high .

 

 

 

(Reduce Range).

 

 

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

 

 

Lights stay on

1. A flood lamp is positioned too close to

continuously.

the sensor or pointed at nearby ob-

 

jects that cause heat to trigger the

 

sensor. (Reposition the lamp away

 

from the sensor or nearby objects).

 

2. Light Control is pointed toward a heat

 

source like an air vent, dryer vent, or

 

brightly-painted heat-reflective sur-

 

face. (Reposition sensor).

 

3. Light Control is in Manual Mode.

 

(Switch to Auto.)

 

 

Lights flash on

1. Heat or light from the lamps may be

and off.

turning the Light Control on and off.

 

(Reposition the lamps away from the

 

sensor).

 

2. Heat being reflected from other ob-

 

jects may be affecting the sensor.

 

(Reposition sensor).

 

3. Light Control is in the Test mode and

 

warming up. (Flashing is normal un-

 

der these conditions).

 

4. Light may be leaking through the

 

floodlampreflectors.(Replacethelamps

 

with new high quality PAR 38 lamps).

 

 

TECHNICAL SERVICE

(Do Not Send Products)

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at 1-800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty Products™

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service Specialty Products

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

TEN YEAR LIMITED WARRANTY

This is a “Limited Warranty” which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of ten years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you. Light bulbs are not covered. To obtain a refund or a replacement, return the product to the place of purchase. Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, or unauthorized service.

This warranty covers only DESA Specialty Products™ assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTS™ FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Retain receipt for warranty claims.

4

595-5612-08

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Features Mode Switching SummaryOperation Model SL-9525Installation Wire the Light ControlWall Mount Eave Mount Mount the Light ControlTest and Adjustment SpecificationsMaximum Range Coverage AngleTroubleshooting Guide Technical ServiceNo Service Parts Available for this Product TEN Year Limited WarrantyFuncionamiento Modelo SL-9525Instalacion Montaje en pared Montaje en aleroInstale EL Control DE LUZ Conecte EL Control DE LUZPrueba Y Ajuste EspecificacionesAlcance Máximo Angulo de Lo menos sensibleGuia DE Investigacion DE Averias Servicio TƒCNICONo enviar los productos No hay piezas de servicio disponibles para este productoRŽsumŽ du mode de commutation FonctionnementModèle SL-9525 CaractŽristiquesMontage mural Montage sous Avant-toit CåBLAGE DE LA Commande DÕƒCLAIRAGEBlanc /blanc Essais ET RƒGLAGES Fiche TechniquePortée maximale Angle de Le moins sensible Le plus sensibleService Technique Guide DE DƒPANNAGENenvoyez pas de produits Aucune pice de rechange nÕest disponible pour ce produit

SL-9525 specifications

The Heath Zenith SL-9525 is a versatile and innovative motion-activated light designed to enhance security and convenience in residential and commercial settings. This outdoor motion light serves as a reliable solution for illuminating dark areas and deterring potential intruders, while its modern design seamlessly blends with various architectural styles.

One of the standout features of the SL-9525 is its advanced motion detection technology. Equipped with a passive infrared (PIR) sensor, the light can detect movement in its range of up to 180 degrees, with a detection distance of up to 30 feet. This ensures that any motion detected within this radius triggers the light, providing illumination exactly when needed.

The SL-9525 also allows for customizable settings, making it user-friendly and adaptable to different environments. Users can adjust the sensitivity of the motion detection, ensuring that the light is triggered only when necessary, thereby reducing the chances of false alarms due to passing animals or gusts of wind. Additionally, the fixture includes a timer setting, allowing users to control how long the light remains illuminated after activation, with options typically ranging from 1 to 10 minutes.

In terms of construction, the Heath Zenith SL-9525 is designed with durability in mind. Made from high-quality, weather-resistant materials, it is built to withstand varying environmental conditions, ensuring longevity and consistent performance. The fixture is also equipped with a stylish and contemporary design, often featuring a sleek black finish that enhances its aesthetic appeal.

Another notable characteristic of the SL-9525 is its energy efficiency. Utilizing LED technology, it not only provides bright illumination but also consumes significantly less power compared to traditional incandescent bulbs. This energy-efficient design helps in reducing electricity bills while contributing to a more sustainable environment.

Overall, the Heath Zenith SL-9525 is an outstanding choice for anyone looking to enhance their outdoor security lighting. With its advanced motion detection capabilities, customizable settings, durable construction, and energy-efficient operation, it stands out as a reliable and effective solution for illuminating exterior spaces. Whether used for home security, walkway lighting, or garage illumination, the SL-9525 ensures safety and convenience, making it a valuable addition to any property.
Top Page Image Contents