Test and Adjustment, Maximum Range | Heath Zenith SL-7001 specification

Clamp Screw

Ball Joint

Aim Sensor Down for Short Coverage

Aim Sensor Higher for Long Coverage

For proper operation, the sensor head must be rotated face down as shown in the next two steps.

❒Rotate the sensor head towards the clamp screw joint.

Control Switch

Joint Clamp

❒Then rotate the sensor head clockwise 180° so the controls face down.

AIMING THE SENSOR.

❒Loosen the clamp screw in

the sensor ball joint.

❒ Walk through the cover- age area noting when the lights turn on. Gently move the sensor head up, down, or sideways to change the coverage area. Wait 5 to 10 seconds after light turns off to retest.

❒ Increase sensitivity only as needed. Too much sensi- tivity will cause false trigger- ing and reduce battery life.

❒ Secure the sensor head into position by tighten- ing the clamp screw. Do not overtighten the screw.

❒After dark, adjust the light to cover desired area.

Place the sensor switch in AUTO for normal opera- tion. If the light is not needed, put the switch in the OFF position.

❒Plug the solar panel cable into the bottom of the battery case. Allow the battery to charge with three days of sunshine before testing.

TEST AND ADJUSTMENT

❒Slide the sensor switch to the TEST (center) position.

❒Place the SENSITIVITY ad- justment in the minimum

	SENSITIVITY
(counterclockwise) position.	TEST
(counterclockwise) position.	OFF AUTO

Avoid aiming the control at:

•Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

100°

Bottom of Sensor

NOTE: Sensor has a 1 minute warm up period before it will detect motion. When switching modes wait 1 minute.

8ft.

(2.4 m)

50 ft.

(15.2 m)

Maximum Range	Maximum
	Coverage Angle

The detector is less sensitive to motion directly towards it and more sensitive to across motion.

MotionMotion

Sensor

Least Sensitive

Most Sensitive

2	595-5291-04

SL-7001 specifications

The Heath Zenith SL-7001 is a sophisticated and reliable outdoor motion-activated light that combines advanced technology with practical functionality, making it an ideal choice for home security and convenience.

One of the standout features of the SL-7001 is its high-performance motion sensor. Equipped with a 180-degree detection angle and an extended range of up to 30 feet, this sensor ensures that any movement within its perimeter is promptly detected. This wide coverage area is particularly beneficial for large yards or driveways, providing maximum safety and visibility during nighttime hours.

The SL-7001 comes with an adjustable sensitivity setting, allowing users to customize the detection parameters to suit their environment. Homeowners can fine-tune the sensor to avoid false alarms caused by small animals or passing cars, ensuring that it only activates when necessary. Additionally, the adjustable time setting can be configured for anywhere between 5 seconds to 10 minutes, allowing the light to remain illuminated for a predetermined time after activation, which is ideal for various outdoor scenarios.

Another technological innovation integrated into the Heath Zenith SL-7001 is its dual-light design. This model features two separate heads, each of which can pivot independently, allowing users to direct the light exactly where it is needed. This versatility maximizes illumination in key areas around the home, enhancing security and visibility.

The SL-7001 also boasts weatherproof construction, ensuring durability and performance in a range of outdoor conditions. Its sturdy housing protects the internal components from rain, snow, and extreme temperatures, making it suitable for year-round use.

Moreover, the Heath Zenith SL-7001 is equipped with energy-efficient LED bulbs. These bulbs consume significantly less energy compared to traditional incandescent options, leading to reduced energy bills and a lower environmental footprint. The long lifespan of LED technology also means less frequent bulb replacements, adding to the product's overall convenience and cost-effectiveness.

Installation of the SL-7001 is straightforward, with comprehensive instructions included for a hassle-free setup. The unit can be mounted on a variety of surfaces, making it a versatile choice for different locations around the home.

In conclusion, the Heath Zenith SL-7001 is an exemplary model of modern outdoor lighting, combining advanced motion-sensing technology, durability, and energy efficiency. Its user-friendly features make it a valuable addition to any home, enhancing safety and providing peace of mind.