Heath Zenith SL-7001 manual Specifications, Troubleshooting Guide, Things to Remember

Page 3

THINGS TO REMEMBER:

•Periodically clean the solar panel with a soft cloth and warm water. Do not hose spray. Keep the collector clear of snow and leaves. Make sure trees and other objects do not block sunlight from the panel.

•If not to be used for several weeks, turn the unit OFF. Store it with the panel connected and where the panel can gather sunlight.

•Solar collection is only effective in direct sunlight. Every hour the light is on requires a minimum of 16 hours of sunlight charging. Solar panels collect less than 10% of the sun’s energy. Light bulbs convert this energy to light at 5% efficiency.

•Several days of use with overcast skies may dis- charge the battery. Because of the battery protection circuit, the light will not work until the battery is fully recharged.

•This light is supplied with a 15 watt bulb. Using a larger bulb will decrease battery life.

SPECIFICATIONS

Range . . . . . . . . . . . . . Up to 50 ft. (15.2 m); [varies with surrounding temperature]

Sensing Angle . . . . . . . Up to 100°

Lamp . . . . . . . . . . . . . . 15 watt, 6 volt halogen Battery Type . . . . . . . . Sealed lead acid, 6 V 5.0 A-Hr. On Time . . . . . . . . . . . 30 seconds, re-triggerable Full Charge on Time . . Up to 1 hour

Replace lamp only with same type lamp, 20 watts or less. DO NOT reverse the battery wires. Damage to the unit will result. Like any lead-acid battery, this battery must be disposed of properly.

DESA Specialty Products™ reserves the right to dis- continue products and to change specifications at any time without incurring any obligation to incorporate new features in products previously sold.

TROUBLESHOOTING GUIDE

SYMPTOM

POSSIBLE CAUSE

 

 

 

 

Lights will not

1. Battery is dead (Switch the sensor

come on.

 

OFF and let the battery charge for

 

 

three or more sunny days before

 

 

using again).

 

2.

Sensor is turned OFF.

 

3.

Lamp is loose or burned out.

 

4.

Daylight turn-off is in effect (re-

 

 

check after dark).

 

5.

Incorrect aiming (Re-aim the sen-

 

 

sor to cover desired area).

 

 

Lights come on

1. Light Control may be installed in a

in daylight.

 

relatively dark location.

 

2.

Light Control is in Test (Set control

 

 

switch to AUTO position).

 

 

Lights come on

1. Light Control may be sensing small

for no apparent

 

animals or automobile traffic (re-

reason.

 

aim sensor).

 

2. Sensitivity is set too high (Reduce

 

 

sensitivity).

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

 

 

 

 

Lights stay on

1.

Light Control is pointed toward a

continuously.

 

heat source like an air vent, dryer

 

 

vent, or brightly-colored heat-re-

 

 

flective surface (Reposition sensor).

 

2.

Light Control is in Test Mode

 

 

(Switch to Auto).

 

 

 

Lights flash on

1.

Heat or light from the lamp may be

and off.

 

turning the Light Control on and off

 

 

(Reposition the lamps away from

 

 

the sensor).

 

2.

Heat being reflected from other

 

 

objects may be affecting the sen-

 

 

sor (Reposition sensor).

 

3.

Light Control is in the Test mode

 

 

and warming up (Flashing is nor-

 

 

mal under these conditions).

 

4.

Battery is almost dead (Reduce

 

 

sensitivity. If flashing continues,

 

 

switch the sensor OFF and let the

 

 

battery charge for three or more

 

 

sunny days before using again).

 

 

 

595-5291-04

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model SL-7001 Solar Powered Motion Sensor LightInstallation OperationLeast Sensitive Test and AdjustmentMaximum Range Coverage AngleThings to Remember SpecificationsTroubleshooting Guide Symptom Possible CauseDo Not Send Products Technical ServiceNo Service Parts Available for this Product Five Year Limited WarrantyModelo SL-7001 Luz detectora de movimiento con alimentación solarFuncionamiento InstalaciónCobertura máxima Prueba Y AjusteAlcance Máximo Ángulo de Sensibilidad MínimaSíntoma Posible Causa EspecificacionesGuía DE Análisis DE Averías Puntos QUE SE Deben RecordarServicio Técnico No enviar los productosGarantía Limitada a 5 Años
Related manuals
Manual 12 pages 60.01 Kb

SL-7001 specifications

The Heath Zenith SL-7001 is a sophisticated and reliable outdoor motion-activated light that combines advanced technology with practical functionality, making it an ideal choice for home security and convenience.

One of the standout features of the SL-7001 is its high-performance motion sensor. Equipped with a 180-degree detection angle and an extended range of up to 30 feet, this sensor ensures that any movement within its perimeter is promptly detected. This wide coverage area is particularly beneficial for large yards or driveways, providing maximum safety and visibility during nighttime hours.

The SL-7001 comes with an adjustable sensitivity setting, allowing users to customize the detection parameters to suit their environment. Homeowners can fine-tune the sensor to avoid false alarms caused by small animals or passing cars, ensuring that it only activates when necessary. Additionally, the adjustable time setting can be configured for anywhere between 5 seconds to 10 minutes, allowing the light to remain illuminated for a predetermined time after activation, which is ideal for various outdoor scenarios.

Another technological innovation integrated into the Heath Zenith SL-7001 is its dual-light design. This model features two separate heads, each of which can pivot independently, allowing users to direct the light exactly where it is needed. This versatility maximizes illumination in key areas around the home, enhancing security and visibility.

The SL-7001 also boasts weatherproof construction, ensuring durability and performance in a range of outdoor conditions. Its sturdy housing protects the internal components from rain, snow, and extreme temperatures, making it suitable for year-round use.

Moreover, the Heath Zenith SL-7001 is equipped with energy-efficient LED bulbs. These bulbs consume significantly less energy compared to traditional incandescent options, leading to reduced energy bills and a lower environmental footprint. The long lifespan of LED technology also means less frequent bulb replacements, adding to the product's overall convenience and cost-effectiveness.

Installation of the SL-7001 is straightforward, with comprehensive instructions included for a hassle-free setup. The unit can be mounted on a variety of surfaces, making it a versatile choice for different locations around the home.

In conclusion, the Heath Zenith SL-7001 is an exemplary model of modern outdoor lighting, combining advanced motion-sensing technology, durability, and energy efficiency. Its user-friendly features make it a valuable addition to any home, enhancing safety and providing peace of mind.
Top Page Image Contents