Heath Zenith SL-5525 manual Troubleshooting Guide, Technical Service, TEN Year Limited Warranty

Page 4

TROUBLESHOOTING GUIDE

SYMPTOM

POSSIBLE CAUSE

 

 

 

Light will not

1.

Light switch is turned off.

come on.

2.

Bulb is loose or burned out.

 

3.

Fuse is blown or circuit breaker is

 

 

turned off.

 

4.

Daylight turn-off is in effect (recheck

 

 

after dark).

 

5.

Incorrect circuit wiring, if this is a

 

 

new installation.

 

6.

Re-aim the sensor to cover desired

 

 

area.

 

 

 

Light comes on

1.

Light control may be installed in a

in daylight.

 

relatively dark location.

 

2.

Light control is in test. (Set control

 

 

switch to an ON-TIME position.)

 

 

 

Light comes on

1.

Light control may be sensing small

for no apparent

 

animals or automobile traffic (re-

reason.

 

aim sensor).

 

2.

Sensitivity is set too high. (Reduce

 

 

sensitivity.)

 

 

 

Lights flash

1.

Sensor is detecting its own light.

once, then stay

 

(Reposition lamp to keep area be-

off in Manual

 

low the sensor relatively dark.)

Mode.

 

 

 

 

 

SYMPTOM

POSSIBLE CAUSE

 

 

Light stays on

1. The lamp is positioned too close to

continuously.

 

the sensor or pointed at nearby ob-

 

 

jects that cause heat to trigger the

 

 

sensor. (Reposition the lamp away

 

 

from the sensor or nearby objects.)

 

2.

Sensor is pointed toward a heat

 

 

source like an air vent, dryer vent, or

 

 

brightly-painted heat-reflective sur-

 

 

face. (Reposition sensor.)

 

3.

Control is in Manual Mode. (Set to

 

 

Auto.)

 

 

 

Light flashes

1.

Heat or light from the lamp may be

on and off.

 

turning the Light Control on and off.

 

 

(Reposition the lamp away from the

 

 

sensor.)

 

2.

Heat being reflected from other ob-

 

 

jects may be affecting the sensor.

 

 

(Reposition sensor.)

 

3.

Light Control is in the Test mode and

 

 

warming up. (Flashing is normal un-

 

 

der these conditions).

 

4.

If eave installation, Light Shield not

 

 

installed properly. (Install Light Shield

 

 

according to instructions.)

 

 

 

TECHNICAL SERVICE

Please call 1-800-858-8501 for assistance before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at 1-800-858-8501,7:30 AM to 4:30 PM CST (M-F). You may also write* to: DESA Specialty Productsª

ATTN: Technical Service Specialty Products P.O. Box 90004, Bowling Green, KY 42102-9004

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

TEN YEAR LIMITED WARRANTY

This is a ÒLimited WarrantyÓ which gives you specific legal rights. You may also have other rights which vary from state to state or province to province.

For a period of ten years from the date of purchase, any malfunction caused by factory defective parts or workmanship will be corrected at no charge to you.

Not Covered - Repair service, adjustment and calibration due to misuse, abuse or negligence, light bulbs, batteries, and other expendable items are not covered by this warranty. Unauthorized service or modification of the product or of any furnished component will void this warranty in its entirety. This warranty does not include reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service, or return shipping charges.

This warranty covers only DESA Specialty Productsª assembled products and is not extended to other equipment and components that a customer uses in conjunction with our products.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WAR- RANTY, REPRESENTATION OR CONDITION OF MERCHANT ABILITY OR THAT THE PRODUCTS ARE FIT FOR ANY PARTICULAR PURPOSE OR USE, AND SPECIFICALLY IN LIEU OF ALL SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUEN- TIAL DAMAGES.

REPAIR OR REPLACEMENT SHALL BE THE SOLE REMEDY OF THE CUSTOMER AND THERE SHALL BE NO LIABILITY ON THE PART OF DESA SPECIALTY PRODUCTSª FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAM- AGES, INCLUDING BUT NOT LIMITED TO ANY LOSS OF BUSINESS OR PROFITS, WHETHER OR NOT FORESEEABLE. Some states or provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Proof of purchase is required for warranty claims.

4

595-5295-11

Image 4
Contents Operation Motion Sensing Halogen FixtureModel SL-5525 Installation Bulb InstallationWire the Light Control Wall Mount Eave MountTest and Adjustment SpecificationsMaximum Range Coverage AngleTroubleshooting Guide Technical ServiceNo Service Parts Available for this Product TEN Year Limited WarrantyAparato de Halógeno y Detector de Movimiento FuncionamientoModelo SL-5525 CaracterísticasInstalacion Montaje en pared Montaje en aleroInstalación DE Bombilla Conecte EL Control DE LUZAlcance M‡ximo Angulo de Prueba Y AjusteLo menos sensible Guia DE Investigacion DE Averias Servicio TécnicoNo hay piezas de servicio disponibles para este producto No enviar los productosFonctionnement Luminaire-détecteur de mouvement à halogèneModle SL-5525 Installation DE LA Lampe Câblage DE LA Commande D’ÉCLAIRAGEMontage DE LA Commande D’ÉCLAIRAGE Montage muralEssais ET Réglages Fiche TechniquePortŽe maximale Angle de Le moins sensible Le plus sensibleService Technique Guide DE DépannageAucune pièce de rechange n’est disponible pour ce produit Nenvoyez pas de produits

SL-5525 specifications

The Heath Zenith SL-5525 is a versatile and innovative outdoor motion-activated security light designed to enhance safety and visibility around homes and businesses. It combines advanced technology with practical features to provide an effective solution for deterring intruders and illuminating dark areas.

One of the main features of the SL-5525 is its motion-detection capability. It is equipped with a passive infrared (PIR) sensor that can detect movement within a range of up to 30 feet. This allows the light to automatically turn on when it detects motion, providing immediate illumination where it is needed most. The sensor is adjustable, allowing users to customize the detection range and angle based on their specific needs. This ensures that the light activates only when necessary, contributing to energy efficiency.

In addition to its motion-activated function, the SL-5525 has a built-in dusk-to-dawn sensor. This feature enables the light to illuminate automatically at dusk and turn off at dawn, providing round-the-clock security without requiring manual operation. Users can rely on this light to enhance visibility during nighttime hours, ensuring that pathways are well-lit and reducing the risk of accidents or unwanted incidents.

The SL-5525 also boasts a durable construction designed to withstand various weather conditions. Its weather-resistant housing ensures that it remains functional even in harsh environments, making it an ideal choice for outdoor installation. The light is equipped with LED bulbs, which are known for their longevity and energy efficiency. These LED lights not only consume less energy than traditional bulbs but also have a longer lifespan, reducing the frequency of replacements and maintenance.

Another notable characteristic of the Heath Zenith SL-5525 is its sleek and modern design that seamlessly integrates into different outdoor aesthetics. It is available in several finishes to match various home styles, adding to its appeal as a decorative yet functional fixture.

Overall, the Heath Zenith SL-5525 is an excellent choice for homeowners and business owners looking for a reliable, efficient, and stylish outdoor lighting solution. Its combination of motion detection, dusk-to-dawn functionality, robust construction, and energy-saving LED technology makes it a standout option for enhancing security and visibility in any outdoor setting.