Heath Zenith 5326 manual Mounting Black to White to Strap

Page 3

Wire the Light Control

WARNING: Turn power off at circuit breaker or fuse.

Remove the existing light fixture.

Install the mounting strap as shown using two screws that fit your junction box.

The plastic hanger can be used to hold the fixture while wiring. The small end of the plastic hanger can be threaded through the hole in the center of the cover plate. The small end then goes into one of the slots on the mounting strap.

Route the light control’s wires through the large gasket holes.

Twist the junction box wires and fixture wires together as shown. Secure with wire connectors.

Mounting

 

 

 

Black to

 

White to

Strap

Black

 

White

 

 

 

 

Rubber

Plug

Mounting

Bolt

Gasket

Junction box ground wire to green ground screw on fixture.

Mount the Light Control

Align the light control cover plate and cover plate gasket. Secure with the mounting bolt.

Align the three slots in the decorative shell with the bulb holder pins. Push the shell in and then twist clockwise to lock. Repeat for other shell.

Shell Slot

Push the rubber plug firmly into place.

If a wet location junction box was not used, caulk the wall plate mounting surface with silicone weather sealant.

To avoid water damage and electrical shock, keep bulb holders 30° below horizontal.

 

Keep bulbs at least

 

1" (25 mm) from the

Lock Nut

sensor. Do not allow

 

the bulbs to block

Lens

the lens.

Adjust the bulb holders by loosening the lock nuts but do not rotate the bulb holders more than 180° from the factory setting.When screwing in the floodlamps, do not overtighten.

598-1269-02

Image 3
Contents Requirements FeaturesDualBrite Motion Sensor Light Control OperationWall Mount InstallationMode Switching Summary DualBrite TimerMounting Black to White to Strap Junction box ground wire to green ground screw on fixtureAvoid aiming the control at Test and AdjustmentTurn on the circuit breaker and light switch Bottom of SensorTroubleshooting Guide SpecificationsNo Service Parts Available for this Product Technical ServiceCaracterísticas Control de luz y detector de movimiento DualBriteFuncionamiento RequisitosMontaje en pared Montaje en alero InstalacionResumen de las modalidades del interruptor Luz de Adorno DualBriteLámina de Negro a Blanco a Montaje Advertencia Desconecte la energía en el disyuntorEvite apuntar el control hacia Prueba Y AjusteParte de abajo del detector Prenda el cortacircuitos y el interruptor de luzGuia DE Investigacion DE Averias EspecificacionesNo hay piezas de servicio disponibles para este producto Servicio TécnicoExigences Commande d’éclairage DualBriteMD à détecteur de mouvementFonctionnement CaractéristiquesMontage mural Avant-toit Résumé du mode de commutationMinuterie DualBriteMD Montage sousNoir Câblage de la Commande D’éclairageEssais ET Réglages Bas du détecteurÉviter de pointer l’appareil Guide DE Dépannage Fiche TechniqueAucune pièce de rechange n’est disponible pour ce produit Service Technique598-1269-02 Nº de modelo / N de modèle

5326 specifications

The Heath Zenith 5326 is a versatile and innovative motion-sensing outdoor light fixture designed to enhance security and convenience for homeowners. This product has become popular due to its blend of advanced technology, energy efficiency, and user-friendly features.

One of the standout characteristics of the Heath Zenith 5326 is its dual-head design. This design allows for adjustable illumination angles, ensuring that a wide area can be covered effectively. The dual heads can be aimed independently, providing targeted lighting wherever it is needed most. This feature is crucial for highlighting pathways, entry points, or any other outdoor spaces that may require additional lighting.

The Heath Zenith 5326 employs a high-performance motion sensor that can detect movement up to 180 degrees, with a range of up to 30 feet. This wide detection zone minimizes blind spots, making it an excellent choice for securing the perimeter of a property. The sensor also includes an adjustable time delay, allowing homeowners to set how long the light stays on after activation, which can range from a few seconds to several minutes.

In terms of energy efficiency, the Heath Zenith 5326 utilizes LED bulbs that consume significantly less power compared to traditional incandescent bulbs. This not only reduces electricity bills but also extends the lifespan of the lighting fixture. Because LEDs have a longer operational life, users can expect fewer replacements over time, making it a cost-effective solution for outdoor lighting.

The fixture is designed with durability in mind. Its weather-resistant construction ensures that it can withstand various environmental conditions, including rain, snow, and extreme temperatures. This robustness guarantees that the Heath Zenith 5326 will perform reliably year-round, a crucial factor for outdoor installations.

Installation of the Heath Zenith 5326 is straightforward, with clear instructions provided. The fixture can be mounted on walls or eaves and is compatible with standard electrical boxes. Its sleek and modern design also enhances the aesthetic appeal of any home, providing both functionality and style.

In summary, the Heath Zenith 5326 is an impressive blend of technology, efficiency, and durability. With its dual heads, advanced motion sensing, energy-efficient LED lights, and robust construction, this outdoor lighting solution stands out in the market, making it a preferred choice for security and convenience in residential settings.