Broan QTR100FLT Service Parts, Push grille against ceil- ing Remove light lens, Description

MODEL QTR100FLT

Page 

8. Push grille against ceil- ing.

9. Remove light lens.

Carefully insert a small flat-blade screwdriver be- tween grille and lens. Pry lens out.

10.Install light bulbs.

Fluorescent bulb sup- plied.

Purchase a 4W incan- descent night light bulb.

Insert bulbs into their sockets. Replace lens.

SERVICE NOTE

To remove Blower Assembly:

Unplug motor (7).

Remove thumbscrew (19) from motor plate (9) flange.

Find the single tab on the motor plate (located next to the receptacle).

Push up near motor plate tab while pushing out on side of housing. Or insert a straight-blade screwdriver into slot in housing (next to tab) and

twist screwdriver.

SERVICE PARTS			TAB
Key No.	Part No.	Description
1	97016466	Housing
2	97016449	Duct Connector-4”
3	98010102	Wiring Plate
4	99170245	Screw, #8-18 X .375
5	97016933	Wire Panel/Harness Assembly
6	99020284	Blower Wheel
7	99080582	Motor
8	99100491	Isolator (4 req’d)
9	97016901	Motor Plate
10	99250959	Washer #8 (4 req’d)
11	99260558	Nut, Hex Lock #8-32 (4 req’d)
*	97017566	Blower Assembly (includes key nos. 6 thru 11)
12	97017427	Grille Assembly (includes key nos. 13 & 14)
13	99140199	Grille Spring (2 req’d)
14	99111377	Lens
15	99271358	Bulb, 42W Fluorescent
16	97016864	Ballast Assembly
17	99260423	Nut, Hex #8-32 (2 req’d)
18	99111293	Spacer (2 supplied)
19	99420665	Thumbscrew, #8-18 x .375

Order service parts by “Part No.” - not by “Key No.”

99043995B