Install Housing & Duct, Connect Wiring

I-JOIST

INSTALL HOUSING & DUCT

1.	Bend
	housing
	tabs.
	Use a pliers to
	bend housing
	TABS out to 900.	TABS
		TABS
2.	Mount	SPACER
	housing to	SPACER
	housing to	(use for mounting to I-Joist)
	joist.

Hold housing in place so that the housing tabs contact the bottom of the joist. The hous- ing mounts with four (4) screws or nails. Screw or

nail housing to joist through lowest holes in each mount- ing flange, then through highest holes. NOTE: Mounting to I-JOIST(shown) requires use of SPACERS (included) between the highest hole of each mounting flange and the I-joist.

3. Attach damper/duct connector.

Snap damper / duct connector onto housing.

Make sure con- nector is flush with top of housing and damper flap falls closed.

4. Install

4-inch round duct- work.

Connect 4-inch

round ductwork to damper / duct connector. Run

ductwork to a roof cap or wall cap. Tape all

ductwork connections to make them secure and air tight.

MODEL QTR100FLT

Page

CONNECT WIRING

5. Connect electrical wiring.

Run 120 VAC house wiring to installation location. Use proper UL approved connector to secure house wiring to wiring plate. Connect wires as shown in wiring diagrams.

INSTALL GRILLE

6. Finish ceiling.

Install ceiling material. Cut out around housing.

7. Attach grille to housing.

Squeeze grille springs and insert them into slots on each side of housing.

QTR100FLT specifications

The Broan QTR100FLT is a state-of-the-art ventilation fan designed to enhance air quality in residential spaces. Known for its quiet operation and efficient performance, this model has become a favorite among homeowners seeking a reliable solution for managing indoor air.

One of the standout features of the QTR100FLT is its extremely low noise level, rated at just 0.7 sones. This whisper-quiet operation ensures that you can enjoy a peaceful environment without the distraction of a loud ventilation system. The fan is equipped with a powerful 100 CFM motor, making it suitable for a variety of room sizes, including bathrooms and kitchens, effectively eliminating excess moisture and odors with ease.

The QTR100FLT is constructed with a compact, low-profile design, allowing it to fit seamlessly into ceilings or walls without being obtrusive. Its elegant white finish complements a wide range of interior design styles, ensuring that it blends harmoniously with your home's decor. Additionally, the fan's LED light provides bright, energy-efficient illumination, replacing traditional incandescent bulbs while consuming less energy and lasting longer.

Another significant technology integrated into the Broan QTR100FLT is its polycarbonate lens, which is shatter-resistant and easy to clean. This feature ensures durability and longevity while maintaining optimal performance. The fan also includes a built-in damper that prevents backdrafts, further contributing to the efficiency of your home's heating and cooling systems.

The installation process for the QTR100FLT is straightforward, making it accessible for DIY enthusiasts. The fan comes with all necessary mounting hardware, and its low-profile design ensures that it won't disrupt the aesthetic of your living spaces.

In summary, the Broan QTR100FLT is not just a ventilation fan but a combination of technology, aesthetics, and functionality. With its quiet operation, efficient airflow, and energy-saving LED lighting, it is an ideal choice for homeowners looking to improve indoor air quality while enhancing the overall comfort of their living spaces. Whether you are retrofitting an older home or building a new one, the Broan QTR100FLT stands out as a top-tier option in the world of ventilation solutions.