![](/images/new-backgrounds/1204482/20448235x1.webp)
INSTALLING THE NETWORK
3 DRIVER
Before You Install the Network Driver
Now that the PC Card is installed and connected to the network, the final installation step is to install the network driver. This section describes the requirements for a successful driver installation.
Which Driver Installation Instructions Should You Use?
Ask your MIS department which network driver instructions you should use. Instructions are provided in this chapter for each of the following environments:
■Windows 95 version 4.00.950 or 4.00.950A
■Windows 95 version 4.00.950B (OSR 2)
■Windows NT version 4.0
■Windows NT version 3.51
■Windows for Workgroups
Proceed to the driver installation section that your MIS department recommends to install the driver.
Windows 95
This section describes how to install the network driver when your PC is running Windows 95. You need the Windows 95 system installation files (either on hard disk, floppy diskettes, or CD) to complete the installation.
3Com includes the both the new NDIS 4 network driver and the NDIS 3 network driver on the 3C589D EtherDisk diskette. The 3Com software automatically detects which Windows version is installed on your PC and loads the correct driver.