3Com 3C589D manual Microsoft Windows for Workgroups WFW

3-10CHAPTER 3: INSTALLING THE NETWORK DRIVER

9Click OK to accept the default settings for the 3C589D PC Card or enter new settings.

10If networking is already installed, enter the IP Address if prompted, and reboot the PC to activate the network.

11If networking is not installed, select the transport protocol (NWLink IPX/SPX compatible transport, TCP/IP protocol, NetBEUI protocol) in the Windows NT Setup Window.

a Click OK.

b If prompted, enter the directory name where the NT installation files are located.

c Click No. d Click OK. e Click Close.

f If prompted, enter the domain or workgroup name for Windows Networking and click OK.

g Remove the EtherDisk diskette and restart your PC. The driver installation is complete.

Microsoft Windows for Workgroups (WFW)

The EtherDisk diskette contains a subdirectory structure and files that make it an OEM import disk for Windows for Workgroups (WFW).

WFW v3.11 does not include internal support for the Plug and Play standard. Because NDIS 3 (32-bit) drivers operate only in Plug and Play environments, you cannot operate the 3C589D PC Card with the included 32-bit driver.

To ensure support for WFW v3.11, 3Com includes a 16-bit NDIS 2.0 driver. This driver offers full support for WFW, but may affect PC performance. To resolve this deficiency with WFW 3.11, you may want to upgrade your operating system.