Panasonic Balance, Fader, Tone Enhancement Loudness, Only for CQ-5500U, Only for CQ-5300U

Power and Sound Controls (continued)

Balance

Press the knob to select the BALANCE mode and then turn it clockwise or counterclockwise to shift the sound volume to the right or left speakers.

or L 1 to 15	Balance Center
(R: Right, L: Left)

Fader

Press the knob to select the FADER mode and then turn it clockwise or counterclockwise to shift the sound volume to the front or rear speakers.

or R 1 to 15 Fader Center

(F: Front, R: Rear)

Press and hold

l

FEW k 5500U

Press and hold

l

FEW k 5500U

Note: In the audio mode (BASS/TRE/BAL/FADE), the display will return to regular operation mode when there is no input for more than 5 seconds (2 seconds in the VOL mode).

S•HDB (Super High Definition Bass)

(Only for CQ-5500U)

This featare enhances bass definition.

Press and hold [MUTE] (S•HDB) for more than 2 seconds to activate high-defintion bass.

Press and hold [MUTE] (S•HDB) for more than 2 seconds to cancel.

Tone Enhancement (Loudness)

(Only for CQ-5300U)

Press and hold [MUTE] (LOUD) for more than 2 seconds to enhance bass and treble tones when listening at low or medium volume.

Press and hold [MUTE] (LOUD) for more than 2 seconds again to deactivate when listening at higher volumes.

6