Panasonic CQ-C7300N manual Various Audio Setting, English Audio Setting

Audio Setting
		The sound type changes every time you press [SQ].	CQ-C7300N
		SQ is a function that can call up various sound types at	BAND
		the touch of button in accordance with your listening
Genreto		music type.
		For SQ7, you can also make fine adjustments for SQ
accordingSelection	Quality)Sound(SQ:	presetting, P2-P6, according to your taste.
		FLAT (default)	VOCAL
		ROCK	JAZZ
		POP	CLUB
		Notes:
Sound		¡ Each SQ level is changeable. (a see below)
		¡ Settings of SQ, bass/treble and volume are influenced
		one another. If the influence mentioned above causes
		distortion to the audio signal, readjust bass/treble or
		volume.
			lights when activated.

	You can make fine adjustment to the currently selected
	SQ presetting in each type (except FLAT).				CQ-C7300N
	1 Hold down [SQ] (Sound Quality) for 2				BAND
	sec. or more.				Note: You can select a SQ preset to be targeted
Presetting					with [}] and [{] (and [2]-[6]on the remote con-
					trol).
	The targeted SQ preset appears.
				4 Hold down [}] or [{] for 2 sec. or
	2 Adjust each frequency.
					more to confirm your adjustment.
					The existing adjustment is overwritten with new
SQ					adjustment.
	Note: If you press the [DISP] key, the presetting is
				Notes:
of	canceled. The presetting is active until another SQ
				¡ FLAT is not changeable.
Change	preset is called up.
					the display returns to the regular mode and the cur-
	[]]:	Lower frequency
				¡ The call-up screen is unchanged even after adjusting
	[[]:	Higher frequency			any SQ preset.
			BAND	¡ If no operation takes place for more than 10 seconds,
	q :	Level up			rent SQ setting is activated until switching to another
	w :	Level down			SQ.
				¡ If you hold down [BAND] for 2 sec. or more on the
	3 Hold down [}] or [{] for 2 sec. or
					SQ call-up screen, the presetting that is called up can
					be initialized.
	more to confirm your adjustment.
				¡ Other audio settings should be adjusted here as well.
					(a Page 15)

Various Audio Setting

1 Press [VOLUME]

(SEL: Select) to display the menu display.

2 Press [VOLUME] (SEL: Select) to select a mode to be adjusted.

3 Turn [VOLUME] (Volume) clock- wise or counter- clockwise to adjust.

Note: If no operation takes place for more than 5 sec- onds in the audio menu (2 seconds in Main volume adjustment and 10 sec. in the SQ preset change opera- tion), the display returns to Regular Mode.

Main volume adjustment

(Setting range: 0 to 40, Default: 18)

q: Up

w : Down

Bass adjustment

(Setting rang: -12 dB to +12 dB, 2 dB Step, Default: Bass 0)

q : Up

w: Down

Treble adjustment

(Setting range: -12 dB to +12 dB, 2 dB Step, Default: Treble 0)

q : Up

w : Down

SQ preset change

(Adjustable frequency: 60 Hz,160 Hz, 400 Hz, 1 kHz, 3

kHz, 6 kHz, 16 kHz, Setting range: –12 dB to +12 dB, 2 dB Step)

(Change of SQ Presetting a Page 14)

Balance adjustment

(Setting range: L15 to R15 and Centre, Default: Centre)

q: Right enhanced

w : Left enhanced

Fader adjustment

(Setting range: R15 to F15 and Centre, Default: Centre)

q: Front enhanced

w : Rear enhanced

Subwoofer level adjustment

(Setting range : MUTE, -6 dB to +6 dB, 2 dB Step, Default: 0)

q : Up

w: Down

Subwoofer Low Pass Filter

(Setting range: 80 Hz, 120 Hz, 160 Hz, Default: 80 Hz)

q: Up

w : Down

High Pass Filter

(Setting range: Filter OFF, 90 Hz, 135 Hz, 180 Hz, 225 Hz, Default: Filter OFF)

q : Up

w : Down

English

Audio Setting

14 15