Pelco ES30TI manual Ac Hi Hot

Page 9

3. Attach the base of the system to an Esprit mount (EWM or EPP) with the three flathead 10-32 x 1/2-inch screws and washers (supplied).

MOUNTING

SCREWS

MOUNT

BASE

Figure 3. Attaching the Base

4.Route the wires and cables through the center of the Esprit mount. Reinstall the transformer module into the base. The transformer module can be positioned in the mount base in only one orientation.

120/230 VOLTAGE SELECTOR SWITCH

Figure 4. Routing Wires and Cables

5.120/230 VAC models only: Set the 120/230 voltage selector switch on the transformer to the appropriate voltage.

6.Connect wires and cables.

a. Connect to AC power. Use the two supplied clamp connectors.

 

120/230 VAC

 

 

 

Black wire

 

Input (AC Line)

 

 

 

White wire

 

AC Neutral

 

 

 

Green wire

 

Ground

 

 

 

 

24 VAC

 

 

 

White wire

 

AC HI (HOT)

 

 

 

White wire

 

AC HI (NEUT)

 

 

 

b.Connect the video coaxial cable to the BNC connector.

C1307M-C (8/07)

9

Image 9
Contents ES30TI Esprit With Thermal Imager Page Contents List of Tables List of IllustrationsImportant Safety Instructions Radio and Television Interference Regulatory NoticesDescription ModelsPedestal Mount Wall Mount Lens Format 24 VAC 120/230 VAC Parentheses are Centimeters ALL Others are Inches InstallationAC HI HOT RX+ C1307M-C 8/07 Removing the PAN/TILT Cover TXB Series Translator Board Installation OptionalFastening the Pan/Tilt Cover Reinstalling the PAN/TILT CoverConfiguration Display HOW to Operate Your SystemOperation Controller Pan Tilt Type Operating NotesPatterns Programming PresetsAccessing Main Menu Preset MPT9500 KBD4000/KBD4002/KBD4000VNET300/NET350/NET4001A Endura SystemsMain Menu AGC ModeAZ/EL AZ/EL Line Azimuth Zero Contrast Direction Direction Line Display Duration Display Hot Warm Cool Cold Type Display TypeFrequency Flat Field Correction FFCTemp Change HOT Bias Limit Stops Controller PresetsPresets Limit Stops MenuClear Manual Stops Clear Scan Limit Stops Park Time Minutes Pattern Length Power UP Mode Profile ROI Region of InterestEnabling or Disabling ROI Reset Camera Restore ALL Defaults Restore Camera Defaults Save Profile Scan Speed Sharpness Speed Profile Temp Units Zone Blank ZonesZoom Zoom Line Maintenance and Troubleshooting MaintenanceTroubleshooting Symptom Ground loops Symptom No video or poor videoSymptom Unable to view activity through glass Switch Setting AppendixSW1-5 SW1-6 SW1-7 SW1-8 Table C. Switch Settings for SW2 112 232 Electrical SpecificationsProduct Warranty and Return Information ISO9001

ES30TI specifications

The Pelco ES30TI is a high-performance security camera designed for robust surveillance applications. This cutting-edge device combines innovative technology with user-friendly features to deliver exceptional video quality and reliability.

One of the main features of the ES30TI is its advanced imaging capabilities. Equipped with a high-resolution image sensor, this camera captures crisp, detailed video footage even in challenging lighting conditions. The low-light performance is enhanced by its infrared (IR) capabilities, allowing it to provide clear images in total darkness, making it ideal for nighttime surveillance. The camera also supports multiple resolutions and frame rates, offering flexibility to meet various security needs.

In terms of design, the Pelco ES30TI is built with durability in mind. Its rugged, weather-proof housing ensures that it can withstand harsh environmental conditions, making it suitable for both indoor and outdoor applications. The camera's compact and sleek design allows for discreet installation, which is particularly advantageous in urban settings where aesthetics may be a concern.

The ES30TI also integrates advanced technologies to enhance its functionality. One notable feature is the intelligent video analytics capabilities. This includes motion detection, line crossing detection, and intrusion detection. These features help in identifying potential security breaches and alerting users promptly. Additionally, the camera can be easily integrated with existing security systems, providing a seamless security experience.

Another significant characteristic of the Pelco ES30TI is its ease of use. The camera is designed with a user-friendly interface that allows for straightforward configuration and management. Users can access live feeds and recorded footage remotely through a secure network connection, providing peace of mind whether they are on-site or away.

Moreover, the ES30TI supports multiple video compression formats, allowing for efficient storage and transmission of video data. This ensures that the camera can deliver high-quality video while optimizing bandwidth and storage requirements, making it cost-effective for long-term use.

In summary, the Pelco ES30TI is a versatile and reliable surveillance solution equipped with advanced imaging technology, weather-resistant design, intelligent analytics, and user-friendly features. Its combination of performance and durability makes it an excellent choice for a wide range of security applications. Whether monitoring public spaces, commercial properties, or private residences, the ES30TI delivers the quality and reliability that security professionals demand.