Pelco FR85041 installation manual Mounting the TRANSMITTER/RECEIVER Into a Rack

Page 17

MOUNTING

The FT85041 transmitter/FR85041 receiver can be mounted into a rack or can be used as a stand- alone module. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.

NOTE: As a matter of convenience, it is recommended that you set the desired data communication before mounting the FT85041 transmitter/FR85041 receiver. To set the desired data communication, refer to the Data Communication Setup section.

MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK

The FT85041 transmitter/FR85041 receiver can be installed into an RK5000 Series rack mount chassis, which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack. The RK5000 Series rack mount chassis includes the following models:

•RK5000PS-3U and RK5000-3U:Designed to accommodate fiber optic modules as follows:

–The RK5000PS-3U rack mount chassis provides 12 single-width module slots and a power supply.

–The RK5000-3U rack mount chassis provides 14 single-width module slots (a power supply is not included). Power to the modules can be supplied using the optional external power supply (EPS5000-120).

For additional information, refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis Installation manual.

•RK5000PS-5U:Designed to accommodate Endura™ modules but can also accommodate fiber optic modules with the use of the appropriate adapter kit. The RK5002-1UEXP adapter kit is required for installation of the FT85041 transmitter/FR85041 receiver into the RK5000PS- 5U chassis.

For information about the RK5000PS-5U chassis, refer to the RK5000PS-5U Rack Mount Chassis Installation manual.

NOTE: The FT85041 transmitter/FR85041 receiver is a double-width fiber optic module that occupies two slots in the RK5000PS-3U, RK5000-3U, and RK5000PS-5U chassis.

MOUNTING THE TRANSMITTER/RECEIVER TO A WALL

The FT85041 transmitter/FR85041 receiver can be mounted to a wall in the following ways:

•Using the supplied wall clip for attachment of a single module to a wall. For installation instructions, refer to the Mounting the Transmitter/Receiver Using the Wall Clip section.

•Using the optional WM5002 wall mount kits, which are designed for mounting of double- width fiber optic modules. The WM5002-3U base kit allows mounting of a single module to a wall. The WM5002-3UEXP expansion kit allows mounting of an additional module. It is recommended that a maximum of one expansion kit be used with the base kit, allowing a maximum of two double-width modules to be mounted to a wall.

NOTE: The WM5002 wall mount kits can be used with the WM5001 wall mount kits, which are designed for mounting of single-width fiber optic modules. If mounting a mix of single-width and double-width modules is desired, it is recommended that a maximum of two single-width modules and one double-width module be mounted in combination with one another.

For mounting instructions using the wall mount kits, refer to the WM5000 Series Wall Mount Kit Installation manual.

16

C1645M-A (9/06)

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Addendum FT85041/FR85041 Fiber Transmitter Receiver Page List of Illustrations ContentsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Radio and Television Interference Regulatory NoticesDescription Product OverviewModels Optional AccessoriesMultimode Models Single-Mode ModelsFront Panel FT85041 Transmitter Front PanelIllustrates the front panel of the FR85041 receiver Front Panel FR85041 ReceiverRear Panel FT85041 Transmitter Rear PanelIllustrates the rear panel of the FR85041 receiver Rear Panel FR85041 ReceiverData Communication Setup InstallationPackage Contents Data Selection Switch Setting Mounting the TRANSMITTER/RECEIVER to a Wall MountingMounting the TRANSMITTER/RECEIVER Into a Rack Mounting the Transmitter/Receiver Using the Wall Clip Fiber Optic Cable ConnectionsBi-Phase WireRS-485 RS-232 RS-422RS-232 Data Communication Wiring RS-422 Data Communication Wiring RS-485 2-Wire Half Duplex Data Communication Wiring RS-485 4-Wire Full Duplex Data Communication Wiring Manchester Data Communication Wiring Bi-Phase Data Communication Wiring Video Present LED TroubleshootingMeaning Possible Cause Corrective Action Optic Fault LED Laser StatusData Rx LED Meaning Possible Cause Corrective Action Data Tx LEDVideo SpecificationsModel No Optical Maximum Laser PowerProduct Warranty and Return Information ISO9001

FR85041 specifications

The Pelco FR85041 is a cutting-edge indoor network camera that combines high-performance features with advanced technologies to provide exceptional surveillance capabilities. Designed for a wide range of applications, including commercial, retail, and institutional environments, the FR85041 camera offers a robust solution for those seeking to enhance their security systems.

One of the standout features of the FR85041 is its high-definition imaging capability. The camera delivers 1080p resolution at 30 frames per second, ensuring clear and detailed video footage. This high resolution is essential for identifying faces, license plates, and other critical details that can be pivotal in security investigations.

In addition to its impressive resolution, the FR85041 incorporates advanced low-light performance through its Wide Dynamic Range (WDR) technology. This feature allows the camera to produce clear images in challenging lighting conditions, such as stark contrasts between bright and dark areas. This capability is particularly beneficial for monitoring entrance points and areas with mixed lighting.

The FR85041 also employs H.264 video compression, which helps to optimize bandwidth utilization without sacrificing video quality. This technology is crucial for efficient storage management and enables users to retain more footage without overwhelming their network resources. Moreover, it can easily integrate with existing IP surveillance systems, making it a flexible choice for users looking to upgrade their current setups.

Another notable characteristic of the Pelco FR85041 is its built-in analytics. The camera features intelligent video analysis capabilities that can detect motion, trespassing, and loitering, thus improving the efficiency of monitoring efforts. Users can set up custom alerts to notify them of any suspicious activity, enabling a quicker response to potential threats.

The FR85041 also boasts a durable design that meets various environmental standards, making it suitable for use in a variety of indoor settings. Its discrete and unobtrusive form factor allows it to blend seamlessly into different environments without drawing attention.

In conclusion, the Pelco FR85041 is a powerful indoor network camera that combines high-resolution imaging, advanced low-light performance, video compression, and intelligent analytics. Its robust design and flexible integration options make it a leading choice for users seeking reliable surveillance solutions in various professional settings.
Top Page Image Contents