Pelco FR85041 installation manual Data Selection Switch Setting

Page 16

With the FT85041 transmitter/FR85041 receiver powered off, turn the Data Selection switch using a screwdriver until the number representing the required data communication is selected. Refer to Table A for Data Selection switch settings.

Table A. Data Selection Switch Settings

Data Selection

Switch Setting

 

 

RS-232

0 (default setting)

 

 

RS-422

1

 

 

RS-485 2-Wire

2

 

 

RS-485 4-Wire

3

 

 

Manchester/Bi-Phase

4

 

 

NOTE: Switch positions 5-9 are not used.

Note the following:

The FT85041 transmitter/FR85041 receiver allows data translation between RS-232 and RS-422 signal levels. Consequently, the Data Selection switch can be set to 0 (RS-232) on the transmitter and to 1 (RS-422) on the receiver. Conversely, the Data Selection switch can be set to 1 (RS-422) on the transmitter and to 0 (RS-232) on the receiver.

If you wish to change the data communication setting after the FT85041 transmitter/FR85041 receiver has been powered on, power off the transmitter/receiver, change the data communication setting, and then power on the transmitter/receiver again.

C1645M-A (9/06)

15

Image 16
Contents Addendum FT85041/FR85041 Fiber Transmitter Receiver Page Contents List of IllustrationsList of Tables Important Safety Instructions Risk of Electric Shock Do not Open Regulatory Notices Radio and Television InterferenceProduct Overview DescriptionOptional Accessories ModelsMultimode Models Single-Mode ModelsFront Panel Front Panel FT85041 TransmitterFront Panel FR85041 Receiver Illustrates the front panel of the FR85041 receiverRear Panel Rear Panel FT85041 TransmitterRear Panel FR85041 Receiver Illustrates the rear panel of the FR85041 receiverPackage Contents InstallationData Communication Setup Data Selection Switch Setting Mounting the TRANSMITTER/RECEIVER Into a Rack MountingMounting the TRANSMITTER/RECEIVER to a Wall Mounting the Transmitter/Receiver Using the Wall Clip Connections Fiber Optic CableWire Bi-PhaseRS-485 RS-232 RS-422RS-232 Data Communication Wiring RS-422 Data Communication Wiring RS-485 2-Wire Half Duplex Data Communication Wiring RS-485 4-Wire Full Duplex Data Communication Wiring Manchester Data Communication Wiring Bi-Phase Data Communication Wiring Troubleshooting Video Present LEDOptic Fault LED Laser Status Meaning Possible Cause Corrective ActionMeaning Possible Cause Corrective Action Data Tx LED Data Rx LEDSpecifications VideoPower Model No Optical Maximum LaserProduct Warranty and Return Information ISO9001

FR85041 specifications

The Pelco FR85041 is a cutting-edge indoor network camera that combines high-performance features with advanced technologies to provide exceptional surveillance capabilities. Designed for a wide range of applications, including commercial, retail, and institutional environments, the FR85041 camera offers a robust solution for those seeking to enhance their security systems.

One of the standout features of the FR85041 is its high-definition imaging capability. The camera delivers 1080p resolution at 30 frames per second, ensuring clear and detailed video footage. This high resolution is essential for identifying faces, license plates, and other critical details that can be pivotal in security investigations.

In addition to its impressive resolution, the FR85041 incorporates advanced low-light performance through its Wide Dynamic Range (WDR) technology. This feature allows the camera to produce clear images in challenging lighting conditions, such as stark contrasts between bright and dark areas. This capability is particularly beneficial for monitoring entrance points and areas with mixed lighting.

The FR85041 also employs H.264 video compression, which helps to optimize bandwidth utilization without sacrificing video quality. This technology is crucial for efficient storage management and enables users to retain more footage without overwhelming their network resources. Moreover, it can easily integrate with existing IP surveillance systems, making it a flexible choice for users looking to upgrade their current setups.

Another notable characteristic of the Pelco FR85041 is its built-in analytics. The camera features intelligent video analysis capabilities that can detect motion, trespassing, and loitering, thus improving the efficiency of monitoring efforts. Users can set up custom alerts to notify them of any suspicious activity, enabling a quicker response to potential threats.

The FR85041 also boasts a durable design that meets various environmental standards, making it suitable for use in a variety of indoor settings. Its discrete and unobtrusive form factor allows it to blend seamlessly into different environments without drawing attention.

In conclusion, the Pelco FR85041 is a powerful indoor network camera that combines high-resolution imaging, advanced low-light performance, video compression, and intelligent analytics. Its robust design and flexible integration options make it a leading choice for users seeking reliable surveillance solutions in various professional settings.