Adding Entries in the System LOG

2.Perform any of the following tasks from this tab:

•Acknowledge all of the alarms by clicking the Acknowledge All button.

•Snooze all of the alarms by clicking the Snooze All button.

•Acknowledge a specific alarm by clicking the Acknowledge Alarm button .

•Snooze a specific alarm by clicking the Snooze Alarm button .

•Hide the alarm details and return to the list view by clicking the Close Alarm Details button .

NOTE: The length of time that an alarm can be snoozed is set for each user in the Endura system. The default snooze time is one minute. To change this setting, refer to the WS5000 Operation manual.

3. Close the Device Details dialog box when you are done handling the alarms for this icon.

The Endura system maintains a system log that contains entries about events as they occur in the system. Entries in the log are created automatically, or an operator can add entries manually.

1.While viewing a map, click an icon that has changed color to reflect the severity of the alarm. The Device Details screen appears. If an icon has several devices associated with it and there is more than one active alarm, the color of the icon reflects the most severe alarm.

Figure 35. Device Details: Alarms Tab

2.If necessary, double-click a color-coded square to view a list of alarms for that severity. The Alarms tab appears with a list of alarms.

3.Select an alarm from the list. Details about the alarm appear at the bottom of the dialog box.

Figure 36. Device Details Dialog Box

4. Click the “Add to Log” button . The “Add to Log” dialog box appears.

30	C3608M (9/07)