Pelco IV IP manual Settings, General TAB, Changing the Device Name, Changing the Language

Settings Page

Use the various tabs on the Settings page to change the name of the dome system on the network; configure network settings; and add, change, or delete users and roles.

GENERAL TAB

Use the General tab to view the device’s current firmware version, change the device name, and change the language setting.

Figure 3. General Tab

CHANGING THE DEVICE NAME

The default device name is Pelco Device. To change the device name:

1.Click the Device Name box and highlight the text.

2.Type a user-friendly name into the Device Name box (2 to 64 characters). A user-friendly name makes it easier to recognize the device on the network. Examples of user-friendly names are Front Door, Lobby, or Parking Lot.

3.Click Save to save the new device name. Click Reset to revert to the previously saved device name.

CHANGING THE LANGUAGE

You can change the language in which the entire Spectra IV IP interface is displayed. This setting can, however, be overridden using the Language drop-down box that is located in the Login dialog box.

The default language is English. To change the language:

1.Open the Language drop-down box by clicking the down arrow.

2.Select a language from the drop-down box. The text in the window is displayed in the selected language.

3.Click Save to save the selected language setting. Click Reset to revert to the previously saved language.

C3444M-A (7/09) 17