MANAGING PATTERNS
To call up a programmed pattern:
1.Click the Patterns tab in the “presets, patterns, and auxiliary controls panel.”
2.Open the Pattern
3.Select a pattern number from the
4.Click Run. The pattern is displayed in the live video pane.
To program a pattern:
1.Click the Patterns tab in the “presets, patterns, and auxiliary controls panel.”
2.Open the Pattern
3.Select a pattern number from the
NOTE: Be careful that you assign a number to the new pattern that is not already assigned to another programmed pattern. If you assign the new pattern with the number of an existing pattern, the previously programmed pattern will be replaced by the new pattern.
4.Click Start.
5.In the live video pane, move the camera to the desired series of locations.
6.Click End.
MANAGING AUXILIARY CONTROLS
1.Click the Aux tab in the “presets, patterns, and auxiliary controls panel.”
2.Click either the On or Off button for Aux 1 or Aux 2 to perform the desired function.
For auxiliary configuration instructions, refer to Aux in the Spectra IV Installation/Operation manual.
CAPTURING A STILL IMAGE
1.Click the capture button.
2.The File Download dialog box opens, and the following massage appears: “Do you want to open or save this file?”
3.Select one of the following options:
Open: Your computer’s photo editing program opens and displays the screen image. This function is available only when using Internet Explorer version 7.0 or later. This function is not available if you are using Internet Explorer version 5.5 or 6.0.
Save: The image is saved as a JPEG file on your computer.
Cancel: The the captured image is not saved or displayed and the dialog box closes.
EXPANDING THE VIDEO TO FULL PAGE
1.Click the “full page” button. The live video pane expands to the full size of the page, and all other controls are hidden.
2.To capture a video image, click the capture button.
3.To return to the Home page, click the back button.
12 |