Pelco IS150 manual Suspended Ceiling

Page 10

SUSPENDED CEILING

NOTE: You should install the camera module into the back box before installing the back box into the surface. When installing the back box into the surface, rotate the camera module to access the mounting holes (refer to Camera Module on page 12 for more information).

1.Pull video and power wires to the ceiling tile.

2.Mount the unit to the ceiling tile (refer to Figure 3):

a.Remove the ceiling tile from the ceiling.

b.Cut a hole 3.5 inches (9 cm) in diameter in the ceiling tile. Use the supplied adapter plate as a template. Punch four screw holes in the ceiling tile.

c.Attach the back box to the ceiling tile and adapter plate with four supplied 8-32 x 1.25-inch Phillips flat head screws.

d.Reinstall the ceiling tile with the unit.

 

ADAPTER PLATE

 

CEILING TILE

8-32 X 1.25-INCH

 

PHILLIPS FLAT

BACK BOX

HEAD SCREWS

 

(SUPPLIED)

 

Figure 3. Ceiling Tile Installation

3.Remove an adjacent ceiling tile.

4.Connect the video cable/wires:

BNC: Connect the BNC connector from the unit to a mating BNC connector.

UTP: Blue wire = Video +

Gray wire = Video -

5. Connect the power wires.

Voltage

Red Wire

Black Wire

 

 

 

12 VDC

+

Ground

 

 

 

24 VAC

~

~

 

 

 

AC operation only: If you are wiring more than one Camclosure to the same transformer, connect one side of the transformer to the red wire on all units; connect the other side of the transformer to the black wire on all units.

NOTE: Failure to connect all AC powered units the same way will cause the cameras to be out of phase with each other and may produce a vertical roll when switching between cameras.

10

C3427M-C (10/07)

Image 10
Contents IS150 Series Camclosure C3427M-C 10/07 Contents List of Illustrations Regulatory Notices Radio and Television InterferenceDescription ModelsParts List Qty DescriptionShown Actual Size Unshielded Twisted Pair UTP Video Cover and Back Box InstallationFixed CEILING/WALL Suspended Ceiling Deep Electrical Box Installation 4S Deep Electrical BOXCamera Module Module RemovalBack Box Connectors Module Installation Camera OrientationCamera Adjustments Varifocal Lens Zoom and Focus AdjustmentsDN/CH Series Adjustments Switch SettingsAuto Iris Level Adjustment Vertical Phase Adjustment DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-2 Line SyncSW1-4 AWB Auto White Balance/MWB Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Liner and Trim Ring Adjustment Groove Liner Loosen ScrewsService Connector Attaching the 2.5 mm Monaural Headphone Plug Specifications GeneralC3427M-C 10/07 C3427M-C 10/07 Product Warranty and Return Information ISO9001
Related manuals
Manual 12 pages 28.36 Kb

IS150 specifications

The Pelco IS150 is a state-of-the-art security camera system designed for high-performance surveillance in a multitude of environments. Known for its durability and advanced technologies, the IS150 provides users with enhanced security measures, making it a leading choice for various applications.

At the heart of the Pelco IS150 are its powerful imaging capabilities. This camera utilizes a high-resolution image sensor that ensures crystal-clear video quality, even in challenging lighting conditions. The IS150 features advanced low-light performance, allowing for effective surveillance during night-time or poorly lit conditions. This capability is crucial for maintaining round-the-clock security, as it ensures that any potential threats are clearly captured regardless of ambient light.

One of the standout features of the Pelco IS150 is its robust construction, designed to withstand harsh environmental conditions. This camera is rated for both weather resistance and impact resistance, making it suitable for outdoor use as well as in high-traffic areas. The rugged design is complemented by an IP66 rating, which guarantees protection against dust and powerful water jets, ensuring that the camera continues to function optimally in diverse weather conditions.

The Pelco IS150 also prides itself on advanced connectivity options. With support for Power over Ethernet (PoE), the camera simplifies installation by allowing a single cable to deliver both power and data. This feature not only streamlines the setup process but also helps reduce installation costs and complex wiring. In addition, the IS150 supports various video streaming protocols, enabling seamless integration with existing security systems for real-time monitoring and recording.

Video analytics is another highlight of the Pelco IS150. With built-in intelligence, the camera can detect unusual activities or specific events, ensuring that security teams can respond quickly to potential threats. This functionality enhances the overall effectiveness of security protocols, allowing for proactive measures rather than reactive ones.

In conclusion, the Pelco IS150 combines high-resolution imaging, durable design, versatile connectivity, and intelligent video analytics to deliver a comprehensive surveillance solution. Whether used in commercial spaces, educational institutions, or urban environments, the Pelco IS150 stands out as a reliable, high-performance security camera that meets the modern demands of safety and security. Its features make it an exceptional choice for those looking to enhance their surveillance capabilities.