Pelco IS150 manual Camera Adjustments, Varifocal Lens Zoom and Focus Adjustments

Page 15

Camera Adjustments

To perform the following camera adjustments, make sure to plug in the camera and service connectors. You may have to remove the camera module from the back box.

Connect a monitor. Then turn on power to the camera and monitor. To use the service connector, refer to Service Connector on page 26.

To set the DIP switches, or to adjust the auto iris level (DN or CH) or the vertical phase (DW or CW), you will need a miniature trimpot adjustment tool with a 0.05-inch (1.27 mm) blade. Suggested tools include a miniature flat-tip screwdriver, a Philmore trimpot tool (#63-8608), and the Philmore 10-piece tool set (#63-910). To adjust the lens, you may also need a miniature Phillips screwdriver.

After you have adjusted the unit, reinstall the camera module into the back box, and install the trim ring, bubble, and liner (if necessary).

VARIFOCAL LENS ZOOM AND FOCUS ADJUSTMENTS

To adjust the field of view and the focus (refer to Figure 8):

NOTE: You may need a miniature Phillips or flat-tip screwdriver to loosen and tighten the locking screws.

1.Loosen the zoom locking screw.

2.Turn the zoom adjustment ring clockwise or counterclockwise to select the field of view.

3.Tighten the zoom locking screw.

4.Loosen the focus locking screw.

5.Turn the focus locking screw clockwise or counterclockwise to adjust the focus.

6.Tighten the focus locking screw.

FOCUS

ZOOM

Figure 8. Location of Zoom and Focus Adjustments

C3427M-C (10/07)

15

Image 15
Contents IS150 Series Camclosure C3427M-C 10/07 Contents List of Illustrations Radio and Television Interference Regulatory NoticesModels DescriptionQty Description Parts ListShown Actual Size Cover and Back Box Installation Unshielded Twisted Pair UTP VideoFixed CEILING/WALL Suspended Ceiling 4S Deep Electrical BOX Deep Electrical Box InstallationModule Removal Camera ModuleBack Box Connectors Camera Orientation Module InstallationVarifocal Lens Zoom and Focus Adjustments Camera AdjustmentsSwitch Settings DN/CH Series AdjustmentsAuto Iris Level Adjustment Vertical Phase Adjustment DAY/NIGHT Operation SW1-2 Line Sync DW/CW Series Wide Dynamic Range AdjustmentsSW1-4 AWB Auto White Balance/MWB Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Positioning the Camera Camera PositioningAdjustment Groove Liner Loosen Screws Install Liner and Trim RingService Connector Attaching the 2.5 mm Monaural Headphone Plug General SpecificationsC3427M-C 10/07 C3427M-C 10/07 Product Warranty and Return Information ISO9001
Related manuals
Manual 12 pages 28.36 Kb

IS150 specifications

The Pelco IS150 is a state-of-the-art security camera system designed for high-performance surveillance in a multitude of environments. Known for its durability and advanced technologies, the IS150 provides users with enhanced security measures, making it a leading choice for various applications.

At the heart of the Pelco IS150 are its powerful imaging capabilities. This camera utilizes a high-resolution image sensor that ensures crystal-clear video quality, even in challenging lighting conditions. The IS150 features advanced low-light performance, allowing for effective surveillance during night-time or poorly lit conditions. This capability is crucial for maintaining round-the-clock security, as it ensures that any potential threats are clearly captured regardless of ambient light.

One of the standout features of the Pelco IS150 is its robust construction, designed to withstand harsh environmental conditions. This camera is rated for both weather resistance and impact resistance, making it suitable for outdoor use as well as in high-traffic areas. The rugged design is complemented by an IP66 rating, which guarantees protection against dust and powerful water jets, ensuring that the camera continues to function optimally in diverse weather conditions.

The Pelco IS150 also prides itself on advanced connectivity options. With support for Power over Ethernet (PoE), the camera simplifies installation by allowing a single cable to deliver both power and data. This feature not only streamlines the setup process but also helps reduce installation costs and complex wiring. In addition, the IS150 supports various video streaming protocols, enabling seamless integration with existing security systems for real-time monitoring and recording.

Video analytics is another highlight of the Pelco IS150. With built-in intelligence, the camera can detect unusual activities or specific events, ensuring that security teams can respond quickly to potential threats. This functionality enhances the overall effectiveness of security protocols, allowing for proactive measures rather than reactive ones.

In conclusion, the Pelco IS150 combines high-resolution imaging, durable design, versatile connectivity, and intelligent video analytics to deliver a comprehensive surveillance solution. Whether used in commercial spaces, educational institutions, or urban environments, the Pelco IS150 stands out as a reliable, high-performance security camera that meets the modern demands of safety and security. Its features make it an exceptional choice for those looking to enhance their surveillance capabilities.