Pelco IS150 manual Camera Orientation, Module Installation

Page 14

CAMERA ORIENTATION

At the factory, the camera module is configured for ceiling mounting. For wall mounting, you must change the camera orientation or the video image could be upside down or sideways.

To change the camera orientation (refer to Figure 7):

1.Remove the camera module from the back box if necessary.

2.Remove the tilt adjustment screw and lock washer from each side of the camera.

3.Carefully rotate the camera one quarter or one half turn, depending on desired camera angle.

NOTES:

Make sure to orient the top of the camera to the top of the field of view.

Make sure the wiring harness does not bind.

Make sure to orient the service connector away from the back box.

4.Reinstall the tilt adjustment screw and lock washer on each side of the camera.

5. Verify the camera orientation.

TOP

OF CAMERA

TILT ADJUSTMENT

SCREW AND

LOCK WASHER

TILT ADJUSTMENT SCREW AND LOCK WASHER

BOTTOM OF CAMERA

HEATER BOARD

Figure 7. Camera Orientation

HEATER BOARD

MODULE INSTALLATION

To install the camera module into the back box:

1.Plug the connectors into the back box in the following order (refer to Figure 6 on page 13):

Service (3-pin) connector

Camera (10-pin) connector

Heater board (4-pin) connector

2.Make sure the tabs on the camera bracket and the service connector are pointing out of the enclosure, away from the ceiling or wall.

3.Gently squeeze the bracket, place it against the groove inside the back box, and gently release (refer to Figure 5 on page 12).

14

C3427M-C (10/07)

Image 14
Contents IS150 Series Camclosure C3427M-C 10/07 Contents List of Illustrations Regulatory Notices Radio and Television InterferenceDescription ModelsParts List Qty DescriptionShown Actual Size Fixed CEILING/WALL Cover and Back Box InstallationUnshielded Twisted Pair UTP Video Suspended Ceiling Deep Electrical Box Installation 4S Deep Electrical BOXCamera Module Module RemovalBack Box Connectors Module Installation Camera OrientationCamera Adjustments Varifocal Lens Zoom and Focus AdjustmentsDN/CH Series Adjustments Switch SettingsAuto Iris Level Adjustment Vertical Phase Adjustment DAY/NIGHT Operation DW/CW Series Wide Dynamic Range Adjustments SW1-2 Line SyncSW1-4 AWB Auto White Balance/MWB Manual White Balance SW1-8 Day/Night Operation DW models only Auto Iris Level Adjustment Camera Positioning Positioning the CameraInstall Liner and Trim Ring Adjustment Groove Liner Loosen ScrewsService Connector Attaching the 2.5 mm Monaural Headphone Plug Specifications GeneralC3427M-C 10/07 C3427M-C 10/07 Product Warranty and Return Information ISO9001
Related manuals
Manual 12 pages 28.36 Kb

IS150 specifications

The Pelco IS150 is a state-of-the-art security camera system designed for high-performance surveillance in a multitude of environments. Known for its durability and advanced technologies, the IS150 provides users with enhanced security measures, making it a leading choice for various applications.

At the heart of the Pelco IS150 are its powerful imaging capabilities. This camera utilizes a high-resolution image sensor that ensures crystal-clear video quality, even in challenging lighting conditions. The IS150 features advanced low-light performance, allowing for effective surveillance during night-time or poorly lit conditions. This capability is crucial for maintaining round-the-clock security, as it ensures that any potential threats are clearly captured regardless of ambient light.

One of the standout features of the Pelco IS150 is its robust construction, designed to withstand harsh environmental conditions. This camera is rated for both weather resistance and impact resistance, making it suitable for outdoor use as well as in high-traffic areas. The rugged design is complemented by an IP66 rating, which guarantees protection against dust and powerful water jets, ensuring that the camera continues to function optimally in diverse weather conditions.

The Pelco IS150 also prides itself on advanced connectivity options. With support for Power over Ethernet (PoE), the camera simplifies installation by allowing a single cable to deliver both power and data. This feature not only streamlines the setup process but also helps reduce installation costs and complex wiring. In addition, the IS150 supports various video streaming protocols, enabling seamless integration with existing security systems for real-time monitoring and recording.

Video analytics is another highlight of the Pelco IS150. With built-in intelligence, the camera can detect unusual activities or specific events, ensuring that security teams can respond quickly to potential threats. This functionality enhances the overall effectiveness of security protocols, allowing for proactive measures rather than reactive ones.

In conclusion, the Pelco IS150 combines high-resolution imaging, durable design, versatile connectivity, and intelligent video analytics to deliver a comprehensive surveillance solution. Whether used in commercial spaces, educational institutions, or urban environments, the Pelco IS150 stands out as a reliable, high-performance security camera that meets the modern demands of safety and security. Its features make it an exceptional choice for those looking to enhance their surveillance capabilities.