Sabbath Mode
The Sabbath mode enables those of particular faiths to use their ovens on the Sabbath.
The Sabbath mode can be entered in a Bake mode only. The bake temperature must be within the Sabbath mode temperature range of 100° to 450° F.
If the oven light is on during setup, it remains on throughout the Sabbath mode operation. If the oven light is off during setup, it remains off throughout the Sabbath mode operation.
To set the Sabbath Mode:
No kitchen timers or oven timers may be running when Sabbath mode is entered.
1.Begin a Bake operation. While Bake is running, press and hold the Oven Timer touchpad for five seconds.
If a timer is running when Sabbath mode attempts to start, the display blinks the message: “SABBATH NOT AVAILABLE”.
If no timers are running, the Sabbath mode settings appear in the display. The Sabbath Mode timer blinks showing the value can be edited. The default value is 74:00 (the maximum number of hours for which Sabbath Mode can be set.)
2.Press Enter to accept the default 74:00 hours and start Sabbath Mode. Or use the numeric keypad to enter the desired Sabbath mode timer value. Timer values between 0:01 and 74:00 can be entered.
Note: If no changes are made within 10 seconds, Sabbath Mode auto starts.
English 19
3.Once Sabbath mode has begun, the display changes to show the message “SABBATH ON”.
4.After the Sabbath mode countdown reaches zero, the oven displays the current time and the message “SABBATH”. No user input is accepted in this state. To end the Sabbath Mode and return to normal function, press the Oven Clear/Off touchpad.
Note:
•The temperature in Sabbath Mode is 100° F to 450° F.
•The Sabbath Mode timer can be set between 0:01 and 74 hours.
To edit the Sabbath Temperature:
While editing the temperature in Sabbath mode, there is no feedback from the control. If an invalid temperature is set, the oven will default back to the previous running temperature.
1.Press the Bake touchpad.
2.Enter the new desired set temperature.
3.Press Enter.
The oven will adjust its set temperature after a randomized delay.
Panel Lock
Allows the user to disable all buttons on the control panel. Panel Lock can only be enabled in stand by mode
1.To enable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds (in stand by mode).
2.To disable Panel Lock, press and hold the Panel Lock touchpad for 3 seconds. The display returns to stand by mode.
