Note: Take care to avoid pulling the rack unevenly which will cause it to bind during removal, catching on the oven walls.
Before Using the Appliance for the First Time
•Remove all packing materials and labels from range. Remove packing materials from inside the oven and inside the drawer.
•While cool, wipe with a clean, damp sponge and dry.
•There may be a slight odor during first uses; this is normal and will disappear.
•Optimum cooking results depend on proper cookware being used.
•Optimum oven cooking results depend on proper bakeware being used.
•Read and understand all safety precautions and Use and Care Manual information prior to operating.
Operation - Cooktop
This section explains how to operate the cooktop. See Getting the Most Out of Your Cooktop” for guidelines to improve cooktop results.
About the Cooktop
Use the cooktop for surface cooking applications such as boiling, frying, simmering, steaming and sautéing.
9WARNING
To avoid risk of personal injury, while the self clean cycle is operating, do not operate the cook top and ensure that all surface controls are turned off.
Use the cooktop for surface cooking applications such as boiling, frying, simmering, steaming and sauteing.
9WARNING
The burning of gas cooking fuel can create small amounts of Carbon Monoxide, Benzene, Formaldehyde and Soot. To minimize exposure to these substances, the burners should be adjusted by a certified installer or agency to ensure proper combustion. Ensure proper ventilation with an open window or use a ventilation fan or hood when cooking with Gas. Always operate the unit according to the instructions in this manual.
The cooktop has one control knob for each burner. Push down and turn to the desired heat setting.
Normal Operation (Electronic Ignition/ Reignition)
The cooktop uses electronic igniters to light the burners. There is no pilot light. Each burner has its own igniter. If a burner flame blows out during use, the burner will automatically reignite.
9CAUTION
To avoid possible injury or damage to the appliance, ensure grates are installed exactly per installation instructions and not backwards or upside down.
Typical Flame Characteristics
The burner flame should be blue in color and stable with no yellow tips, excessive noise or fluttering. It should burn completely around the burner cap
English 12
